Hi,
I sent a question about this to Elecraft support, but I didn't get a
reply so let me try the community..
I've got a K3, serial no. 4208, and I would like to change it's band
settings so that it will match my UK licence. Currently, the band
end limitations are not correct for my region.
For
On Thu, 2011-03-17 at 11:45 +, Thomas Horsten wrote:
So I'd like to change the band limitations to lock the unallocated
sections out and avoid accidentally transmitting outside the licenced
bands. For example, I sometimes hit TUNE and scan up and down the
band to make sure that the SWR
...@mailman.qth.net] On Behalf Of Brendan Minish
Sent: Thursday, March 17, 2011 7:56 AM
To: Thomas Horsten
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3] Reconfiguring band boundaries
On Thu, 2011-03-17 at 11:45 +, Thomas Horsten wrote:
So I'd like to change the band limitations to lock
On 17 March 2011 12:02, Tommy Alderman alderm...@windstream.net wrote:
Not only is it inconsiderate to other operators, you run the risk of
damaging your K3 if your antenna happens to become defective. The K3 is a
transceiver, not a swept SWR analyzer!
Ok, so I guess we've established that I
Hi Thomas,
Not at this time. Making this user configurable requires a fair amount of f/w
work and our plate is full with other f/w work at the moment.
73,
Eric
www.elecraft.com
_..._
On Mar 17, 2011, at 5:12 AM, Thomas Horsten tho...@horsten.com wrote:
On 17 March 2011 12:02, Tommy
End of the SWR sweeping portion of this thread.
Eric
Elecraft List Moderator
www.elecraft.com
_..._
On Mar 17, 2011, at 5:02 AM, Tommy Alderman alderm...@windstream.net wrote:
Not only is it inconsiderate to other operators, you run the risk of
damaging your K3 if your antenna happens to
Hi Eric,
On 17 March 2011 13:49, Eric Swartz WA6HHQ - Elecraft
e...@elecraft.com wrote:
Hi Thomas,
Not at this time. Making this user configurable requires a fair amount of f/w
work and our plate is full with other f/w work at the moment.
Ok thanks for the response, I appreciate you have
Strangely enough, most of us wanted to expand the transmission range -
especially those in Oz etc where they can transmitted way outside our limits.
There is software available from Elecraft on request to do that (for MARS).
73 de M0XDF, K3 #174, P3 #108
On 17 Mar 2011, at 11:45, Thomas Horsten
I got a couple of emails off-list in response to my request for
locking down the transceiver for the ham bands only.
The gist of these mails was, that as licenced hams we have been
through the training and exams and should be able to stay within our
licence conditions, and we should (and
On 17 Mar 2011 at 18:17, Thomas Horsten wrote:
If I mistakenly transmit on the wrong frequency within the ham bands, I
may be causing a nuisance to others, but that's as far as it goes - but
if I transmit outside the ham bands I am (in my jurisdiction) committing
a crime and could (in the
Thomas,
If you are experimenting with various computer controls and you have
the out of band concern, I would think the place to place the band
limits would be in the computer application. I know Ham Radio Deluxe
has provisions for setting band limits for you.
73,
Don W3FPR
On 3/17/2011
technical topic.
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Thomas Horsten
Sent: Thursday, March 17, 2011 1:17 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3] Reconfiguring band boundaries
I got
If you're experimenting with various computer controls, that's what TX
Test mode is for!
73, Ross N4RP
On 3/17/2011 3:08 PM, Don Wilhelm wrote:
Thomas,
If you are experimenting with various computer controls and you have
the out of band concern, I would think the place to place the band
Hi Don,
On 17 March 2011 19:08, Don Wilhelm w3...@embarqmail.com wrote:
If you are experimenting with various computer controls and you have the
out of band concern, I would think the place to place the band limits
would be in the computer application. I know Ham Radio Deluxe has
provisions
Scanning with the key down is a very bad practice. Don't do it!
It is your responsibility to keep within your licensed band limits, so I believe
that request is frivoless.
Now if you had a license that allowed you to transmit outside the limits of your
licensed bands such as the members on the
Ok, if you insist on missing the point be my guest. But please read my
last post again, with your eyes open.
On 18 March 2011 00:31, n...@n5ge.com wrote:
Scanning with the key down is a very bad practice. Don't do it!
It is your responsibility to keep within your licensed band limits, so I
...@horsten.com
Subject: Re: [Elecraft] [K3] Reconfiguring band boundaries
To: n...@n5ge.com
Cc: elecraft@mailman.qth.net
Date: Thursday, March 17, 2011, 7:43 PM
Ok, if you insist on missing the
point be my guest. But please read my
last post again, with your eyes open.
On 18 March 2011 00
17 matches
Mail list logo
