On 9/29/2013 8:52 PM, Jim N7US wrote:
Ron,
I think you're referring to the KPA500, not the KAT500. I'm sorry to have
confused you.
The KAT500 has only one on the parts list.
I've had a couple of extras in nearly all the Elecraft kits I've
built, I think they do it on purpose with the very
On Mon, Sep 30, 2013 at 12:00 PM, Fred Jensen k6...@foothill.net wrote:
On 9/29/2013 8:52 PM, Jim N7US wrote:
Ron,
I think you're referring to the KPA500, not the KAT500. I'm sorry to have
confused you.
The KAT500 has only one on the parts list.
I've had a couple of extras in nearly
I replied to Jim off line. That washer is not used. I prepared an errata
today removing it.
The parts lists are created fairly early in the development phase of a
project. I write the kit assembly instructions much later. Usually both the
factory and I audit the parts list to ensure it matches
I'm almost finished assembling a KAT500, and I haven't found a step calling
for the lock washer, #4, interior tooth (P/N E700010). Do any of you KAT500
assemblers remember having an extra? The parts list says only one was
included in the miscellaneous bag.
73, Jim N7US
Jim,
If you had 2 (or more), then you can just keep the extra. Hardware
items are weighed, not counted, so occasionally, you may find extras.
Of course, if you were short, that is a different matter and an email to
pa...@elecraft.com will have one to you in a few days.
73,
Don W3FPR
On
Makes sense, Don, but this one is listed on the parts list but I don't see a
use for it.
73, Jim N7US
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: September 29, 2013 16:02
To: Jim N7US
Cc: Elecraft Reflector
Subject: Re: [Elecraft] [KAT500} Extra lockwasher
, 2013 16:02
To: Jim N7US
Cc: Elecraft Reflector
Subject: Re: [Elecraft] [KAT500} Extra lockwasher in kit?
Jim,
If you had 2 (or more), then you can just keep the extra. Hardware items
are weighed, not counted, so occasionally, you may find extras.
Of course, if you were short, that is a different
, but this one is listed on the parts list but I don't
see a
use for it.
73, Jim N7US
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: September 29, 2013 16:02
To: Jim N7US
Cc: Elecraft Reflector
Subject: Re: [Elecraft] [KAT500} Extra lockwasher in kit?
Jim,
If you had 2
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim N7US
Sent: Sunday, September 29, 2013 2:35 PM
To: d...@w3fpr.com
Cc: 'Elecraft Reflector'
Subject: Re: [Elecraft] [KAT500} Extra lockwasher in kit?
Makes sense, Don
Ron,
I think you're referring to the KPA500, not the KAT500. I'm sorry to have
confused you.
The KAT500 has only one on the parts list.
73, Jim N7US
-Original Message-
Jim:
All 29 #4 interior tooth lock washers are called for in the assembly
procedure. It sounds like you left one
10 matches
Mail list logo