Gerry,
Specific answers:
There is a TX DLY configuration menu item that can be used to set the
delay for the onset of RF - the default value is 8 ms.
The connector for KEYOUT is an RCA connector.
Both the Key and Paddle jacks are 1/4 inch phone jacks.
You would benefit by downloading the K3S
Gerry,
I use a K3 with an AL82. I suspect that the K3s is like the K3.
The setting for semi-break-in is to put the K3 into CW mode and then repeatedly
press & hold the QSK switch until you see the word SEMI in the display.
The connector for key out to operate the linear is an RCA female
I am getting my K3S soon. Have been using Yaesu 1000MP and Ameritron AL82 with
1000MP set to semi QSK and it is OK.
To tun a K3 into an ANertiron or any non Elecraft amp semi qsk, are there any
setting I have to make and where would I find them?
Also, is the connector input for key out RCA
3 matches
Mail list logo