[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe Harris
Sent: Thursday, March 27, 2014 2:54 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Another K3-SignaLink question
Ed,
See page 20 of the K3 manual, in the Line Out setting. You can set the Line
Out level in Config, or it can be set
:29:11 -0500
From: Jim Miller jimmil...@stl-online.net
To: 'Joe Harris' joseph.a.har...@gmail.com,
elecraft@mailman.qth.net
Subject: Re: [Elecraft] Another K3-SignaLink question
Message-ID: 014a01cf4a9a$78622270$69266750$@STL-OnLine.Net
Content-Type: text/plain; charset=us-ascii
Thank
I have just connected my SignaLink to the K3 using SignaLink supplied K3
cables. I find the Line Out amplitude varies according to where I have the
AF control set. I would have thought that Line Out was a constant signal
level. Without setting the AF level quite high I do not get good PSK
Ed,
See page 20 of the K3 manual, in the Line Out setting. You can set the Line
Out level in Config, or it can be set to =PHONES, which is what it sounds
like you have it set to.
73,
Joe, N1QD
On Thu, Mar 27, 2014 at 3:09 PM, Edward F. Steinfeld edw...@go-embedded.com
wrote:
I have just
Thanks for asking and answering this question. This was on my list of
things to figure out.
Tom - wa4ta
On Thu, Mar 27, 2014 at 3:53 PM, Joe Harris joseph.a.har...@gmail.comwrote:
Ed,
See page 20 of the K3 manual, in the Line Out setting. You can set the Line
Out level in Config, or it
I think we all have such a list, Tom. It just
takes a while to work through it. K3/KX3 are very
complex and flexible rigs!
73, Phil w7ox
On 3/27/14, 1:14 PM, Tom Armour wrote:
Thanks for asking and answering this question. This was on my list of
things to figure out.
Tom - wa4ta
On Thu,
6 matches
Mail list logo