FW: [Elecraft] Connecting the K2/100 to the KAT100

27, 2006 10:31 AM To: John Wiener; Elecraft email Subject: RE: [Elecraft] Connecting the K2/100 to the KAT100 John, You apparently have a short in the KPA100, most likely on the 12CTRL line. You can find this line on the schematic entering the KAT100 at J3 pin 8. Follow the line to determine what

RE: [Elecraft] Connecting the K2/100 to the KAT100

John, You apparently have a short in the KPA100, most likely on the 12CTRL line. You can find this line on the schematic entering the KAT100 at J3 pin 8. Follow the line to determine what other points it connects to and check them all until you find the short. I do not know what the resistance t

[Elecraft] Connecting the K2/100 to the KAT100

Hi everyone. I am attempting to use the KAT100 for the first time and a new homebrew G5RV. Just finished the cabling and went successfully thru calibration steps. Then, I put the covers on the KAT100. When I turned on the K2, a click and no other response on K2, no LCD. No LEDs on KAT1