on this.
Terry, W0FM
-Original Message-
From: Dick Dievendorff [mailto:die...@comcast.net]
Sent: Wednesday, July 14, 2010 2:52 PM
To: Guy Olinger K2AV
Cc: r...@aol.com; Elecraft Discussion List
Subject: Re: [Elecraft] eHam.net forum message
This is a huge undertaking, and the MCU config variables
I wonder if he is talking about QRN from storms, etc. or manmade QRN?
I've heard this before. The K3's AGC pulse rejection feature is intended to
improve
performance in this area.
Has anyone tried to quantify or describe this better? It would need to be done
with an a/b
comparison. It's not
Thank you for posting K9OM's comment.
FWIW I have a Perseus and two other receivers which both use H-Mode mixers,
one of which uses a version of PA3AKE's H-Mode front end.
With the Perseus used as a stand alone receiver, I have not experienced this
noise problem in the presence of mild or
FWIW I have a Perseus and two other receivers which both use H-Mode mixers,
one of which uses a version of PA3AKE's H-Mode front end.
With the Perseus used as a stand alone receiver, I have not experienced
this
noise problem in the presence of mild or quite strong static or manmade
pulse
Thanks for your explanation, I had missed the point of RLVZ's comment.
A related cause and I am speculating here without doing the calculations,
when the noise is rough and signals are at or under the noise floor might be
the added in-passband low level intermodulation products generated by a
Would it be possible to add a function to the utility which creates a
file which lists all the K3 settings and configurations and control
settings when it is invoked? Something that could be cut and pasted
into an email or attached? This would be useful for many problem
resolve sessions.
I'm
This is a huge undertaking, and the MCU config variables are a moving target.
But it is (low) on my list of possible K3 Utility enhancements.
Dick, K6KR
Sent from my iPhone
On Jul 14, 2010, at 12:41 PM, Guy Olinger K2AV olin...@bellsouth.net wrote:
Would it be possible to add a function to
:52 PM
Subject: Re: [Elecraft] eHam.net forum message
This is a huge undertaking, and the MCU config variables are a moving
target. But it is (low) on my list of possible K3 Utility enhancements.
Dick, K6KR
Sent from my iPhone
On Jul 14, 2010, at 12:41 PM, Guy Olinger K2AV olin
Regarding key clicks. I suspect this may vary considerably with the
specific circumstances including the likelihood of considerable
variations in the individual transmitter rise and fall times and and the
roofing filter bandwidths.
Last November, I think, I read a suggestion about blanking
Dick Van Zandt (K9OM) has sent you a forum message for you to review.
- start of message -
Noisy DSP experiences.
Forum: Articles
Subject: An Interesting CQ WPX CW Experience
The quot;noisy DSPquot; phenomena is well known. Rob Sherwood has also
identified this problem and has
I imagine that one possible reason why someone might choose to NOT use
their callsign is to be able to speak their thoughts without fear of
recrimination or retribution. It is not necessarily cowardly but perhaps
more 'avoiding personal confrontation.' ... because there are hams who
will
It is up and running.
Slater VE5OA
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
eHam.net site is back up!
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I just checked and still no Eham, let's hope whatever's broken can be
fixed and they're back soon! 73 de Alex NS6Y.
On May 25, 2006, at 12:04 AM, Tom Harson wrote:
eHam.net site is back up!
___
___
Elecraft mailing
14 matches
Mail list logo