On Tue, 27 Oct 2009 21:02:08 -0400, you wrote:
The best solution to this is what some software calls an ALIGN or OPT
function. This works as follows: with a wide filter, find the signal you
want by clicking on it in the waterfall; click on the ALIGN or OPT
button which retunes your radio so
Derw, AF2Z, wrote:
I use both .01 and .05. It's just a little inconvenient when
changing from one to the other and the WIDTH gets reset to 400 Hz every
time.
If you're inclined to use a rig control program, DXLab's Commander now has
very nice slider controls for adjusting the K3's bandwidth and
10:26 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Elecraft] K3 PB Ctrl Shift .01/.05
Derw, AF2Z, wrote:
I use both .01 and .05. It's just a little inconvenient when
changing from one to the other and the WIDTH gets reset to
400 Hz every
time.
If you're inclined to use a rig
Joe Subich, W4TV wrote:
If you're inclined to use a rig control program, DXLab's
Commander now has very nice slider controls for adjusting the
K3's bandwidth and shift. It only takes a click of the mouse
to change between 10 Hz and 50 Hz increments. (DXLab is free!)
The 10 Hz/50 Hz
,
... Joe, W4TV
-Original Message-
From: Chuck Guenther [mailto:charles9...@att.net]
Sent: Tuesday, October 27, 2009 11:05 AM
To: li...@subich.com
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft] K3 PB Ctrl Shift .01/.05
Joe Subich, W4TV wrote:
If you're inclined
The bandwidth appears to be limited when using 10 hz and it is painfully
slow when the bandwidth is fairly wide.
When I am in PSK or RTTY and using search and pounce, I use wide bandwidth
in HRD and DM780 to find the signal I want on the screen and then narrow it
in so it is better for me to
KG0KP wrote:
The bandwidth appears to be limited when using 10 hz and it is painfully
slow when the bandwidth is fairly wide.
...
What would be really nice, if possible, is to auto change to 10 hz shift
when you adjust your width below (pick a number) 200 or so and back when
you go
7 matches
Mail list logo
