I had similar issue. i used a 3.5mm to 2.5mm audio cable (each end three
segment), from a Yaesu SCU-39 cable kit I was not using which looked perfect
for the job.
However it turned out the centre segment was not wired, with same results as
above. Initially I thought my line-in was possibly not
Options menu (F7) Swap I and Q channels fixes that fast...
But be aware that all cables should be wired so, that I and Q are
connected the same way to the L and R line inputs of the sound card.
73,
Peter
Op 2013-12-09 1:00 schreef Chris Johnson:
I followed the guide on HDSDR's website for
into the
program. Most common cause is not having stereo input on sound card on
computer but iMic is stereo. I would check cable.
73 - Mike WA8BXN
---Original Message---
From: Chris Johnson
Date: 12/8/2013 7:01:29 PM
To: Elecraft Reflector
Subject: [Elecraft] HDSDR Mirrored
I followed the guide on HDSDR's website for the KX3 and it IS working, but it
is odd vs all my other SDR radios. The RF seems mirrored on both sides of the
center DC spike. Is this normal?
I'm using an iMic with the RXIQ setup using the HDSDR KX3 guide exactly.
Tuning works great. Input
: 12/8/2013 7:01:29 PM
To: Elecraft Reflector
Subject: [Elecraft] HDSDR Mirrored spectrum
I followed the guide on HDSDR's website for the KX3 and it IS working, but
it is odd vs all my other SDR radios. The RF seems mirrored on both sides of
the center DC spike. Is this normal?
I'm using
5 matches
Mail list logo