Is there any difference between the K2 proset and the regular
Heil proset (with either the HC4 or HC5)?
Yes, the mic element is different and requires bias. But, with the TX
equalizer in the K3, you can make any of these sound like the others.
73,
Ed - W0YK
Ken,
My Heil is working with the K3 just fine. No problems getting enough drive.
Doug -- K0DXV
K3/100 #77
Ken Kopp wrote:
I have made an adapter cable for connecting my
several ICOM mics to my K3 and they all work well.
I have a Heil GM-4/5 Goldline desk mic and I have
an uneasy feeling that
I have 2 Heil Prosets, the Elecraft version and the ICOM/Yaesu /5 version.
Later today I'll check them side by side for comparison on the K3. I can make
both work equally well on the K-2 using the UN-PCB Universal Mic Interface to
switch the bias in or out.
I use the Heil/Elecraft Proset
Is there any difference between the K2 proset and the regular Heil
proset (with either the HC4 or HC5)?
Jay - KT5E
[EMAIL PROTECTED] wrote:
I have 2 Heil Prosets, the Elecraft version and the ICOM/Yaesu /5 version.
Later today I'll check them side by side for comparison on the K3. I can
Jay - the Heil Proset (December, 2004) for the K2 that I have has an
electret (condenser) microphone and therefore requires bias. It was
furnished with the Heil adapter cable that has a red bead on it which,
according to the instructions, May be marked Kenwood and came with the
5.6K resistor as
I have made an adapter cable for connecting my
several ICOM mics to my K3 and they all work well.
I have a Heil GM-4/5 Goldline desk mic and I have
an uneasy feeling that it doesn't have enough output
to adequately drive the K3.
Is anyone using this mic with a K3 that can confirm
my suspicion?
I have a Heil GM-4/5 Goldline desk mic and I have an uneasy
feeling that it doesn't have enough output to adequately drive the K3.
Is anyone using this mic with a K3 that can confirm my suspicion?
There should be plenty of mic gain. I believe WK6I is using a Goldline with
his K3. If you
I have a Heil GM-4/5 Goldline desk mic and I have
an uneasy feeling that it doesn't have enough output
to adequately drive the K3.
Is anyone using this mic with a K3
I have a Goldline that I use with my K3.
that can confirm my suspicion?
I cannot confirm your suspicion, however, since my
8 matches
Mail list logo