Welcome aboard both the reflector and the Elecraft owner family. You will love
that rig.
Harlan
K4HES
Sent from my iPhone
> On Jun 26, 2017, at 7:16 PM, Tommy wrote:
>
> Thank you Wayne I will!
>
> 73!
>
>
>
>> On 06/26/2017 07:11 PM, Wayne Burdick wrote:
>> Hi Tom,
Thank you Wayne I will!
73!
On 06/26/2017 07:11 PM, Wayne Burdick wrote:
Hi Tom,
Yes, the ATU will be installed at the factory. Let me know if you have
questions about the rig.
73,
Wayne
N6KR
On Jun 26, 2017, at 4:06 PM, Tommy wrote:
Well I took the plunge and
Tom,
Your KX2 will come fully assembled with all the options you ordered at
the same time as the KX2.
Options ordered afterward have to be installed by the owner unless the
KX2 is sent back to the factory (you need an RSA assigned for that -
contact support).
73,
Don W3FPR
On 6/26/2017
Hi Tom,
Yes, the ATU will be installed at the factory. Let me know if you have
questions about the rig.
73,
Wayne
N6KR
> On Jun 26, 2017, at 4:06 PM, Tommy wrote:
>
> Well I took the plunge and just ordered my first Elecraft radio, the KX2! I
> also ordered the ATU and
Well I took the plunge and just ordered my first Elecraft radio, the
KX2! I also ordered the ATU and battery/charger. Will the ATU be
installed before shipping?
Just a quick hello. Been reading the mail list on the list web site and
just joined it as well.
73!
Tom - KB2SMS
On 8/5/2011 10:33 PM, Nate Bargmann wrote:.
If programming tickles your fancy in any way, Perl is a good place to
start. It's very forgiving of various logic methods and it has a large
community around it. It has been famously referred to as the duct tape
that holds the Internet together
Neoklis == Neoklis Kyriazis n5b...@yahoo.com writes:
Neoklis Hi Thomas
Neoklis The problem is that I have installed a 64-bit only Arch
Neoklis Linux X86-64 distro and the utility is 32-bit. If necessary
Neoklis I beleive I can install multilib, which could give me
Neoklis
On 04/08/11 15:32, Neoklis Kyriazis wrote:
The problem is that I have installed a 64-bit only Arch Linux X86-64 distro
and the utility is 32-bit. If necessary I beleive I can install multilib,
which could give me 32-bit compatibility so the utility can run. I will try
later after I finish
* On 2011 05 Aug 01:41 -0500, Pierfrancesco Caci wrote:
Neoklis,
I use 64bit ubuntu (the last LTS, though, not the most recent
one), and the K3util works fine. The only thing that doesn't work is the
help tool of the k3util, some library is missing/confused.
I was advised to install the
From: Pierfrancesco Caci p...@tippete.net
Neoklis,
I use 64bit ubuntu (the last LTS, though, not the most recent
one), and the K3util works fine. The only thing that doesn't work is the
help tool of the k3util, some library is missing/confused.
I can understand the feeling. I just bought an HP
Nate -
The commands are in the programmers manual. See MC, FA, MD for the basics.
73, Mike NF4L
On 8/5/2011 6:40 AM, Nate Bargmann wrote:
Yes, unfortunately that is true. It's too bad that the memory editing
commands used by the memory editor have not been released so an
equivalent program
Nate -
I can't find anything about the text string either.
But a memory can still be set.
Select the memory channel with an MC - MC027;
Set the freq with an FA - FA00010141000;
Set the mode with MD - MD3;
Tap the VM switch twice - SWT15;SWT15; Look for the table of switch numbers
under
the
Mike == Mike n...@nf4l.com writes:
Mike Nate -
Mike I can't find anything about the text string either.
Mike But a memory can still be set.
Mike Select the memory channel with an MC - MC027;
Mike Set the freq with an FA - FA00010141000;
Mike Set the mode with MD -
Pierfrancesco,
Interesting. I've never played with Perl.
The statement (comment?) #set the label caught my eye. It doesn't set the
text
string, correct?
73, Mike
On 8/5/2011 4:25 PM, Pierfrancesco Caci wrote:
Mike == Miken...@nf4l.com writes:
Mike Nate -
Mike I can't find
Whoever wrote the K3 Memory Editor has the secret to setting the label. Maybe
they'd
be willing to share it with one of the linux programmers?
Wayne? Dick?
73, Mike, NF4L
__
Elecraft mailing list
Home:
* On 2011 05 Aug 17:50 -0500, Mike wrote:
Pierfrancesco,
Interesting. I've never played with Perl.
If programming tickles your fancy in any way, Perl is a good place to
start. It's very forgiving of various logic methods and it has a large
community around it. It has been famously referred
Mike == Mike n...@nf4l.com writes:
Mike Pierfrancesco,
Mike Interesting. I've never played with Perl.
Mike The statement (comment?) #set the label caught my eye. It
Mike doesn't set the text
Mike string, correct?
That's a comment (anything after a # is a comment in
Hi
I have just joint the elecraft mailing list as I am interested in the K3.
However I am a Linux user, and as such always have problems with (not)
available software from vendors of most equipment for Ham Radio, among other
things.
I have already sent a couple of emails to K3 support but so
Hello Nick and welcome to the Elecraft list.
Yes, the K3 utility is certainly available for Linux and you can get it
at
http://www.elecraft.com/K3/software/k3utility_1_4_1_8.tgz
I cannot claim to be a user of Linux myself, but you might like to give
the above program a go.
73
David G4DMP
In
: http://www.qsl.net/5b4az/
- Original Message -
From: David Pratt da...@g4dmp.fsnet.co.uk
To: Neoklis Kyriazis n5b...@yahoo.com
Cc: elecraft@mailman.qth.net elecraft@mailman.qth.net
Sent: Thursday, August 4, 2011 12:32 PM
Subject: Re: [Elecraft] Just joined this list - 5B4AZ
Hello Nick
Neoklis,
To obtain a reply direct from Elecraft, send email to supp...@elecraft.com.
Some of the people at Elecraft (mostly Wayne Burdick and Eric Schwartz)
do monitor the reflector on occasion, but there are no guarantees.
We are a list of users who try to help each other.
Yes Gary has been on
Thanks David, I will wait for him to settle at work ;-)
Regards
Neoklis - Ham Radio Call 5B4AZ
QTH Locator KM64KR
Website: http://www.qsl.net/5b4az/
- Original Message -
From: David Pratt da...@g4dmp.fsnet.co.uk
To: Neoklis Kyriazis n5b...@yahoo.com
Cc:
Sent: Thursday, August 4,
://www.qsl.net/5b4az/
- Original Message -
From: Don Wilhelm w3...@embarqmail.com
To: Neoklis Kyriazis n5b...@yahoo.com
Cc: elecraft@mailman.qth.net elecraft@mailman.qth.net
Sent: Thursday, August 4, 2011 3:18 PM
Subject: Re: [Elecraft] Just joined this list - 5B4AZ
Neoklis,
To obtain
: Thursday, August 4, 2011 12:32 PM
Subject: Re: [Elecraft] Just joined this list - 5B4AZ
Hello Nick and welcome to the Elecraft list.
Yes, the K3 utility is certainly available for Linux and you can get it
at
__
Elecraft mailing
...@horsten.com
To: Neoklis Kyriazis n5b...@yahoo.com
Cc: elecraft@mailman.qth.net elecraft@mailman.qth.net
Sent: Thursday, August 4, 2011 3:47 PM
Subject: Re: [Elecraft] Just joined this list - 5B4AZ
Hi Neoklis,
The binary I downloaded from Elecraft works just fine on my Linux netbook,
running Ubuntu
25 matches
Mail list logo