Re: [Elecraft] K-2 and digital question

2006-09-09 Thread Bill Coleman
On Aug 30, 2006, at 11:02 AM, H.Cary III wrote: Has anyone connected a RigBlaster with their K2 for SSTV or PSK-31? I don't use a RigBlaster, but I built a homebrew box with a couple of transformers that I've successfully used both with MMTTY on an old Toshiba laptop and with CocoaModem

RE: [Elecraft] K-2 and digital question

2006-09-05 Thread Phil Kane
On Mon, 4 Sep 2006 20:07:38 -0400, Don Wilhelm wrote: The Rigblaster is capable of controlling PTT from its serial port connection. I don't have a RigBlaster, but I just looked at the schematic and see that you must have P5 pin 1 jumpered to pin 10 (PSK31 programs control PTT with the RTS

Re: [Elecraft] K-2 and digital question

2006-09-04 Thread Michael E. Dobson
To the original poster who could not even receive. The RigBlaster is not used during receive. The audio goes straight from the K2 (I use the ext speaker jack) to the Line IN jack on your sound card. Until you can properly receive PSK, SSTV, RTTY, etc, there is no point in connecting up the

Re: [Elecraft] K-2 and digital question

2006-09-04 Thread Phil Kane
On Mon, 04 Sep 2006 10:12:47 -0400, Michael E. Dobson wrote: Once you have receive working, the instructions supplied for the K2 should work for transmitting but that will depend upon how you wired the microphone connector on your K2. Make sure you have the RigBlaster jumpered so that the

RE: [Elecraft] K-2 and digital question

2006-09-04 Thread Don Wilhelm
Phil and all, The Rigblaster is capable of controlling PTT from its serial port connection. I don't have a RigBlaster, but I just looked at the schematic and see that you must have P5 pin 1 jumpered to pin 10 (PSK31 programs control PTT with the RTS signal), and you must jumper P1:B pin 18 to

Re: [Elecraft] K-2 and digital question

2006-09-03 Thread Phil Kane
On Wed, 30 Aug 2006 11:02:12 -0400, H.Cary III wrote: Has anyone connected a RigBlaster with their K2 for SSTV or PSK-31? If so, I'd like to contact you off-line as I have some questions. I've wired the pins in the RigBlaster per the instructions for Elecraft and hooked it up to the computer

RE: [Elecraft] K-2 and digital question

2006-09-03 Thread Phil Kane
On Sun, 3 Sep 2006 20:47:03 -0400, H. Cary III wrote: Will do when I return home...vistiting daughter in Philadelphia...hope to get to work on the K2 digital stuff next weekend...i did manage to turn on rtty in the secondary menu but tht's as far as I've gotten. Only two responses so far...

Re: [Elecraft] K-2 and digital question

2006-08-30 Thread Sanger, Joseph
Please send the responses to the reflector? I am sure many of us are interested! - Original Message - From: [EMAIL PROTECTED] [EMAIL PROTECTED] To: elecraft@mailman.qth.net elecraft@mailman.qth.net Sent: Wed Aug 30 11:02:12 2006 Subject: [Elecraft] K-2 and digital question Has