Keith,
Not a nice problem to address. I can give you some troubleshooting
information if you are willing to hang in there with me.
Eliminate the "[Elecraft]" from the subject line and reply to me
directly (not to the list).
Relay K15 is common on all those bands, but not on 80 and 40m, but
Thanks for your help Dave!
Yes. I was able to get 6 volts on R30 by turning L30. At first the voltage
was too high
so I adjusted the turns on T5 by spreading the red windings further apart.
Then I
was able to get to 6 volts.
I did a CAL FCTR with the probe on TP1 and the frequency set to 4000,
Hi Keith,
Were you able to get 6v on R30 by tuning L30? Did you have to bring the
voltage down or up by moving the windings on T5?
If you would, set the VFO to 4 MHz and do a CAL FCTR on TP1 and let me
know what the reading is. I'm just looking for a couple of clues before
we proceed.
73,
I am having trouble with the K2 VCO alignment. I have moved the T5 windings
and obtained 6 volts at the left end of R30. I then went on to the chart
(table 6-1) to measure the voltages at the listed frequencies. My readings
are ok on 80 40 and 15 meters (between 1.5 to 7.5 volts) but on 30,20,17
4 matches
Mail list logo