Bob,
Yes, the best and easiest way to determine what is wrong is to do
Receiver Signal Tracing. That should allow you to isolate the problem
to a single stage and armed with that information, we can likely help
better.
You do not need a 10 MHz crystal. Any crystal frequency within the
tunin
Greetings,
I just finished building my K2 and seems to work pretty well except
that it does not received like I think it should. I put it side by
side with my K1 and the K1 picked up signals better. They were louder
and clearer on the K1 than the K2. I have made about 3 passes through
the alignm
On May 30, 2006, at 10:10 AM, Darwin, Keith wrote:
On 40 CW, there were some strong signals to my 28' vertical. 30-40 dB
over S9 was not uncommon. I noticed with one of these stations, I
could
hear "clicks" up and down the band for +/- several KHz.
It is quite possible that this guy had
I believe it is the TX side. Here's why:
The SoftRock series of SDR kits are fun for looking at this. The
receiver is extremely wide, on the order of 50KHz to 100KHz, depending
on your version and sound card quality, so there really isn't anything
analogous to the filtering artifacts you mig
Oh GREAT John, you want me to apply logic and problem solving to the
issue :-)
I did not spend much time chasing the issue down at all. Yes, the AF is
a new addition to the rig and I suppose I could (should) remove it just
to confirm that it is not adding to the issue.
Now that I've seen it, I
On Tue, 2006-05-30 at 10:10 -0400, Darwin, Keith wrote:
> Hey folks,
> I noticed with one of these stations, I could
> hear "clicks" up and down the band for +/- several KHz. I though he had
> key clicks. Then I found a 2nd signal that produced the same results.
> Then a 3rd and a 4th. I sup
- Original Message -
From: "Darwin, Keith" <[EMAIL PROTECTED]>
some
On 40 CW, there were some strong signals to my 28' vertical. 30-40 dB
over S9 was not uncommon. I noticed with one of these stations, I could
hear "clicks" up and down the band for +/- several KHz. I though he had
ke
Hey folks,
I did not operate during the big contest this weekend but spent a bit of
time listening. I just got my KAF2 audio filter built and installed and
was anxious to see how it did. While tuning around I noticed some
"problems" that are probably just characteristics of the rig.
On 40 CW,
8 matches
Mail list logo
