[Elecraft] K2 deaf on 40 m

Hi all. My K2 is working fine on 160m, 80m, 30m and 20m but not 40m. I have switched between ANT1 and 2. RANT is OFF. Nothing helps... What went wrong for me? Any settings to check or could it be a hardware failure? 73, Svend OZ7UV

Re: [Elecraft] K2 deaf on 40 m

Svend, Chack the bandpass filters. Especially check the capasitor values in the BP-filters. I bet that you will find the soultion of your problem there. 73! Hans / LA2MOA 2009/2/21 Svend Spanget span...@privat.dk Hi all. My K2 is working fine on 160m, 80m, 30m and 20m but not 40m. I have

Re: [Elecraft] K2 deaf on 40 m

Svend, Is this a newly built K2, or one that used to work and has now failed. Do you have the K60XV option? If it is newly built, check to be certain you have installed C6 (on the bottom of the RF Board near the rear panel) correctly. Its leads should be in the outer holes of the set of 3

Re: [Elecraft] K2 deaf on 40 m

...@privat.dk Cc: elecraft@mailman.qth.net Dato: Lør, 21. feb 2009 19:57 Emne: Re: [Elecraft] K2 deaf on 40 m Svend, Is this a newly built K2, or one that used to work and has now failed. Do you have the K60XV option? If it is newly built, check to be certain you have installed C6 (on the bottom

Re: [Elecraft] K2 deaf on 40 m

Svend, In that case, try the Cheap and Dirty Signal Tracing in the K2 that you can download from the Elecraft website Builder's Resource page then Troubleshooting Tips link. The direct link is http://www.elecraft.com/TechNotes/SigTr/K2%20Cheap%20%27n%20Dirty%20Signal%20Tracing.pdf. That