Graziano,
I understand the S-meter display is OK, but that is not related to what
I was saying.
I hate to see you replace the pushbutton and still have the problem.
Tap the DISPLAY button and see if it displays the voltage and current.
If not, replace the pushbutton.
If it does display the
Hello Don,
thanks for the answer.
Maybe i did a wrong explanation and the last lines made a bit of confusion.
I was intended to say that is normal that when you are in CW, when you press
the RF-/ALC button nothing happen and you get only a "BUP-TONE" back !
The problem is the during transmission
Graziano,
Does the DISPLAY button work normally? If so, there is no problem with
the button itself.
The difference between a tap and a hold is determined by the MCU.
73,
Don W3FPR
On 5/22/2017 6:13 AM, Graziano Roccon wrote:
Hello,
a friend of mine have an Elecraft K2, always working
Hello,
a friend of mine have an Elecraft K2, always working perfectly.
Yesterday, without any apparently motivation, the smeter stop to show RF Power
level during transmit.
The K2 emit power without problem and the external wattmeter show the right
power.
The smeter is working in RX, but not
4 matches
Mail list logo
