I should also mention we are using Fiber to the home for Inet here and 10MB
DSL link at the remote
Typical ping times are 50MS range and Latency range is usually 10-20 range
and Jitter 0-4 range usually 0 as it was a moment ago when tested.
Not sure why RTTY decode is a problem using the s
/0 and RTTY
Both RTTY and CW decode should work remotely. Use a narrow filter passband
tune the signal in carefully using the CWT meter scale (pgs. 33 and 34 of
the owner's manual). Decode accuracy is affected by noise, fading, and
interference, but should work as long as the signal is corr
Both RTTY and CW decode should work remotely. Use a narrow filter passband tune
the signal in carefully using the CWT meter scale (pgs. 33 and 34 of the
owner's manual). Decode accuracy is affected by noise, fading, and
interference, but should work as long as the signal is correctly tuned in an
I have a K3/0 and remote K3 setup using the RemoteRig boxes from Elecraft.
SSB/CW is fine. When I switch the K3/0 to DATA mode and set up the onboard
text decode and FSK to 45Bps . I get nothing but gibberish.. There is NO
decoding possible for RTTY and the CW-RTTY does not key the remote un
4 matches
Mail list logo
