I thought the saying was: "When all else fails, read the manual".
John KK9A
Jim Brown K9YC wrote:
With every new thing that comes into my life, my first action is to
RTFM. I am VERY frustrated that I can't do that with my Android phone,
and was equally frustrated 20 years ago when asked to
Print to (or download) the pdf version, then put that into a file space on your
Android.
73,
Rick NK7I
> On Mar 30, 2022, at 12:53 PM, Jim Brown wrote:
>
> On 3/30/2022 12:19 PM, Pete Smith N4ZR wrote:
>> I think a case can be made that when the K3 says its setting for this
>> is"NOR",
On 3/30/2022 12:19 PM, Pete Smith N4ZR wrote:
I think a case can be made that when the K3 says its setting for this
is"NOR", that should mean power per band.
With every new thing that comes into my life, my first action is to
RTFM. I am VERY frustrated that I can't do that with my Android
Always good to have your input, Jim ... but I think a case can be made
that when the K3 says its setting for this is"NOR", that should mean
power per band. After all, when you QSY band to band, don't you often
wind up adjusting the power?
73, Pete N4ZR
Check out the new Reverse Beacon
RTFM, Pete! :)
73, Jim K9YC
On 3/30/2022 7:51 AM, Pete Smith N4ZR wrote:
I finally found the PWR SET menu option. I would have thought that the
NOR setting would be per band, to facilitate quick QSY, but sure enough,
mine was set to NOR (or presumably "fixed") with PER BAND being the
Thanks to everyone who responded. I finally found the PWR SET menu
option. I would have thought that the NOR setting would be per band, to
facilitate quick QSY, but sure enough, mine was set to NOR (or
presumably "fixed") with PER BAND being the alternative. Everything is
fine now - after
Hi Pete,
Did you confirm that the drive power from the K3 was changing on 15M when you
adjusted it on 80M and vice versa? I’ve never had this problem 160M through 6M.
Sounds like something may be set wrong in the menu or a failure of some sort.
73,
Bill WE5P
Comfortably Numb
> On Mar 30,
Pete,
You have to set PWR SET in the CONFIG menu to PER BAND.
73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/
On 30-Mar-2022 17:17, Pete Smith N4ZR wrote:
For some time now, I've been noticing that after operating on 15M, my
output power on 80 with my
For some time now, I've been noticing that after operating on 15M, my
output power on 80 with my K3/KPA-1500 would have to be turned down
substantially to get within legal limits. Today I decided to test this,
using a dummy load. I tweaked my input power on 15M to about 1450
watts, and then
9 matches
Mail list logo
