] On Behalf Of Tony Estep
Sent: Sunday, January 09, 2011 2:50 PM
To: Elecraft
Subject: Re: [Elecraft] K3/RigExpert TI-5
On Sun, Jan 9, 2011 at 2:26 PM, Don Wilhelmw3...@embarqmail.com
wrote:
...With the K3, no digital interface is required...everything needed
built-in, no need for a separate
Good afternoon everyone
I just received a RigExpert TI-5 with the factory-made cable for my K3. I've
installed it as directed and I get the K3 to transmit using MXWin software, I
can get the frequency/mode to change on the K3 but not much else.
I have the Line-In on the K3 turned on,etc
I use a RigExpert Plus, which appears to be very similar to the TI-5.
You'll need to set the OUT pot to max and use a high setting on the
windows slider control related to that output. I don't know how that
maps to usage with MixW; I'm using DM780.
The K3 requires more drive than some radios
Larry,
We had a similar problem yesterday too.
Put the K3 into TX TEST and check the audio input level. Are you
getting at least 4 bars indicated on the ALC meter with the 5th bar
flashing occasionally? If not, the audio level is not high enough.
The RigExpert manual only addresses using
On Sun, Jan 9, 2011 at 2:26 PM, Don Wilhelm w3...@embarqmail.com wrote:
...With the K3, no digital interface is required...everything needed
built-in, no need for a separate interface box.
What Don said. Start out by hooking the K3 straight to the computer (3
cables: serial, audio in, audio
: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Tony Estep
Sent: Sunday, January 09, 2011 2:50 PM
To: Elecraft
Subject: Re: [Elecraft] K3/RigExpert TI-5
On Sun, Jan 9, 2011 at 2:26 PM, Don Wilhelm w3...@embarqmail.com wrote:
...With the K3, no digital interface
are not something I have to mess with.
73,
Bob W5OV
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Tony Estep
Sent: Sunday, January 09, 2011 2:50 PM
To: Elecraft
Subject: Re: [Elecraft] K3/RigExpert TI-5
On Sun
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Tony Estep
Sent: Sunday, January 09, 2011 2:50 PM
To: Elecraft
Subject: Re: [Elecraft] K3/RigExpert TI-5
On Sun, Jan 9, 2011 at 2:26 PM, Don Wilhelmw3...@embarqmail.com
wrote:
...With the K3, no digital interface is required...everything needed
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Tony Estep
Sent: Sunday, January 09, 2011 2:50 PM
To: Elecraft
Subject: Re: [Elecraft] K3/RigExpert TI-5
On Sun, Jan 9, 2011 at 2:26 PM, Don Wilhelmw3...@embarqmail.com
, W4TV
Cc: 'Elecraft'; d...@w3fpr.com
Subject: Re: [Elecraft] K3/RigExpert TI-5
Joe,
My apologies to your products, but I have been a long and strong
believer in the KISS principle. Keep It Simple Stupid. Yes, there
are accessories that make things more usable, but at the expense of
simplicity
10 matches
Mail list logo