On Friday Gregory used a Straight-Key to send:
-Original Comment---
> Have you got Menu Tech Mode ON?
yes.
--
Best regards,
Bob KD7YZWin7-64bit + K3
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/li
Bob - The K3 manual does not give as much detail as the KX3 manual which
describes the functions as follows
"Audio Signal Level AFV. This display shows the approximate level of the
audio output, prior to the AF gain control (in other words, the AF gain
control has no effect on the reading). Th
In a recent message, KD7YZ Bob writes
>
>Not I am seeing 99.9dBV for an RMS reading of "1.09 A".
>This isn't too helpful though. Perhaps David
>can elaborate on how I get to a meaningful reading.
The 1.09A is the supply current, Bob; not at all related to the dBV.
David
--
+ - - - - - - - -
On Friday Gregory used a Straight-Key to send:
-Original Comment---
> Have you got Menu Tech Mode ON?
Well, gee. Yes, I did have it on. Really. But now it is "OFF". So I
will guess that the selection is not Persistent. Or that setting has
another way of reverting to OFF.
Not I a
6:06 AM
To: K3 List
Subject: [Elecraft] K3: Use VFO-B to select dBV
Howdy K3' people:
According to the Manual, Page 36, I can use VFO-B display to see dBV after
AFV settles down.
I see the RMS voltage reading but I never get to see the equivalent dBV.
So I rotated through the variables ava
Have you got Menu Tech Mode ON?
Gary
On 15 March 2013 22:33, David G4DMP wrote:
> I am getting dBV here, Bob, the VFO-B knob being fully clockwise.
>
> I presume you have up-to-date firmware? Mine is uC=4.61, D1/2=2.80,
> FL=1.15, DR=1.03.
>
> 73 de David G4DMP
>
> In a recent message, KD7YZ Bo
I am getting dBV here, Bob, the VFO-B knob being fully clockwise.
I presume you have up-to-date firmware? Mine is uC=4.61, D1/2=2.80,
FL=1.15, DR=1.03.
73 de David G4DMP
In a recent message, KD7YZ Bob writes
>According to the Manual, Page 36, I can use VFO-B display to see dBV
>after AFV settle
Howdy K3' people:
According to the Manual, Page 36, I can use VFO-B display to see dBV
after AFV settles down.
I see the RMS voltage reading but I never get to see the equivalent dBV.
So I rotated through the variables available, by turning the VFO-B knob,
everything else is the but no dBV.
And
8 matches
Mail list logo