I'm surprised nobody has mentioned the KRC2 .. red-headed stepchild of
the Elecraft line ;)
I use a KRC2 with a K2 to switch 6 microwave bands in the Jitney ..
903 through 10G. The radio displays the correct frequency with the GHz
lopped off. I reprogrammed the KRC2 (no programming required, just
A good start to home brewing this type of interface can be found at
http://www.unifiedmicro.com/decoder.html
Provides opto isolated binary decodes.
Mark n2qt
Sent from my iPad
On Aug 11, 2012, at 8:58 AM, "Joe Subich, W4TV" wrote:
>
> On 8/11/2012 2:59 AM, w...@iw.net wrote:
>> I would like
On 8/11/2012 2:59 AM, w...@iw.net wrote:
> I would like to use my K3 as an IF radio for some VHF+ transverters.
> I have transverters for 8 bands, and it would be great if the set up
> included automatic bandswitching of the transverters, amps, PTT
> lines, etc. Is there anything out there that ca
: elecraft@mailman.qth.net
Subject: [Elecraft] K3-transverter interface
I would like to use my K3 as an IF radio for some VHF+ transverters. I have
transverters for 8 bands, and it would be great if the set up included
automatic bandswitching of the transverters, amps, PTT lines, etc. Is there
I would like to use my K3 as an IF radio for
some VHF+ transverters. I have transverters
for 8 bands, and it would be great if the set
up included automatic bandswitching of the
transverters, amps, PTT lines, etc. Is there
anything out there that can handle this?
I spend over 300 hours per month
5 matches
Mail list logo
