; HC4.If it is
> > only wiring then I have done correctly , must be something else
> I missed.
> >
> > 73
> >
> > Sejo , N3UA
> >
> > -Original Message-
> > From: Mike [mailto:n...@nf4l.com <mailto:n...@nf4l.com>]
>
only wiring then I have done correctly , must be something else I
> missed.
> >
> > 73
> >
> > Sejo , N3UA
> >
> > -Original Message-
> > From: Mike [mailto:n...@nf4l.com]
> > Sent: Wednesday, December 23, 2009 7:15 PM
> > To: n3ua
&
rectly , must be something else I missed.
>
> 73
>
> Sejo , N3UA
>
> -Original Message-
> From: Mike [mailto:n...@nf4l.com]
> Sent: Wednesday, December 23, 2009 7:15 PM
> To: n3ua
> Cc: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3 + Heil HC4
This link should help with many of the mics floating about in hamdom:
http://homepage.ntlworld.com/rg4wpw/date.html
73,
Julius
Mike-14 wrote:
>
> Here's a .pdf of a Kenwood TS-850. The pinout for the mic is on p. 13.
>
> http://www.qsl.net/dk9ip/850IM/850im.pdf
>
> 73, Mike NF4L
>
> n3ua w
Here's a .pdf of a Kenwood TS-850. The pinout for the mic is on p. 13.
http://www.qsl.net/dk9ip/850IM/850im.pdf
73, Mike NF4L
n3ua wrote:
> Thanks everyone who responded, looks like my problem is Kenwood Adapter.
> Don't have one , wired directly from Heil mic jack 3.5mm tip to K3 Mic
> c
Thanks everyone who responded, looks like my problem is Kenwood Adapter.
Don't have one , wired directly from Heil mic jack 3.5mm tip to K3 Mic
connector pin 1 and ground to ground -pin 7 (8).
Does anyone have Kenwood adapter schematic?
Thanks
73
N3UA
--
View this message in context:
You say the rear panel settings work - put those same settings on the FP
mic menu and try it.
If a condenser mic element works on the FP, then you must have Bias set
on - turn it off for the HC-4 and set the range to H.
You must have the Kenwood adapter to use the front panel connector.
IIRC, t
mailman.qth.net] En nombre de Ian Maude
> Enviado el: MiƩrcoles, 23 de Diciembre de 2009 06:40 a.m.
> Para: n3ua
> CC: elecraft@mailman.qth.net
> Asunto: Re: [Elecraft] K3 + Heil HC4
>
> My guess would be that you have the wrong adapter. It needs to be the
> Kenwood one
: elecraft@mailman.qth.net
Asunto: Re: [Elecraft] K3 + Heil HC4
My guess would be that you have the wrong adapter. It needs to be the
Kenwood one. The settings should be FP-H and no bias.
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC & HB9DRV-9 DX Clusters
Member RSGB, GQRP 9838, FISTS 14077 | K3
My guess would be that you have the wrong adapter. It needs to be the
Kenwood one. The settings should be FP-H and no bias.
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC & HB9DRV-9 DX Clusters
Member RSGB, GQRP 9838, FISTS 14077 | K3 #455
http://www.amateurradiotraining.org
2009/12/23 n3ua
>
>
I am unable to get Heil HC4 working connected to K3 front panel.Tried
FP.H/FP.L with bias on and off but no luck !??.
Connected cheap Condenser Microphone Element on FP - worked great. On rear
panel HC4 works fine. Any idea ?
Thanks
N3UA
--
View this message in context:
http://n2.nabb
11 matches
Mail list logo