K3 (SN 01467) xcvr factor assembled K3/100F
Also includes KAT3-F autotuner, KRX3-F second receiver
KFL3A-400 400 Hz 8-pole filters in both receivers
Signalink USB interface with K3 cable
Hand Microphone
$2150
Elecraft W2 wattmeter with 1.8 - 54 MHz 2 kW Directional Coupler
$210
Rigrunner 4005
Is there an accurate way to utilize a W2 with the K3/ATU combo? Seems that
with the W2 between the output of the K3 and the Antenna, the peak reading
would not be accurate. Especially at QRO power settings. I don't remember
seeing anything in either of the menus that would assist with that.
@mailman.qth.net
Subject: [Elecraft] K3 + W2
Is there an accurate way to utilize a W2 with the K3/ATU combo? Seems that
with the W2 between the output of the K3 and the Antenna, the peak reading
would not be accurate. Especially at QRO power settings. I don't remember
seeing anything in either
...@mailman.qth.net] On Behalf Of Dohn Smythe
Sent: Sunday, February 20, 2011 11:10 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 + W2
Is there an accurate way to utilize a W2 with the K3/ATU combo? Seems that
with the W2 between the output of the K3 and the Antenna, the peak reading
would
Hi all,
Some months ago, I posted[1] about an issue I had with k3util not
functioning correctly on Linux if $HOME/Elecraft already existed,
but $HOME/Elecraft/K3_Firmware did not.
I've just bumped into this problem again, and lost quite a bit of
time before remembering the previous issue.
The
Hi Mike,
Sounds like a bug. I'll look into it.
Tnx,
David, W4SMT
Hi all,
Some months ago, I posted[1] about an issue I had with
k3util not
functioning correctly on Linux if $HOME/Elecraft already
existed,
but $HOME/Elecraft/K3_Firmware did not.
I've just bumped into this problem
6 matches
Mail list logo