] On Behalf Of Fred
Jensen
Sent: Monday, July 28, 2014 14:06 PM
To: Elecraft Reflector
Subject: [Elecraft] K3 Commands
I notice in the K3 Programmers manual that there is a TE command to GET/SET
the Tx Eq, but I can't find an equivalent RE command [or whatever] for the
Rx Eq. Am I missing something
I previously used the same approach of multiple UP or DN commands to use
different microphones before the TE command came out.
I still use UP and DN to select the rear panel versus front panel mic jack
and to change the VOX gain.
I do those in DXLab's Commander module because I'm always using
;
k6dgw@
gt;
Date: 28/07/2014 17:06 (GMT-05:00)
To: Elecraft Reflector lt;
elecraft@.qth
gt;
Subject: [Elecraft] K3 Commands
I notice in the K3 Programmers manual that there is a TE command to
GET/SET the Tx Eq, but I can't find an equivalent RE command [or
whatever] for the Rx
:00)
To: Elecraft Reflector
elecraft@.qth
Subject: [Elecraft] K3 Commands
I notice in the K3 Programmers manual that there is a TE command to
GET/SET the Tx Eq, but I can't find an equivalent RE command [or
whatever] for the Rx Eq. Am I missing something?
73
I notice in the K3 Programmers manual that there is a TE command to
GET/SET the Tx Eq, but I can't find an equivalent RE command [or
whatever] for the Rx Eq. Am I missing something?
73,
Fred K6DGW
- Northern California Contest Club
- CU in the 2014 Cal QSO Party 4-5 Oct 2014
- www.cqp.org
Hi there is none.
You can adjust it up and down but there is no direct command to read it.
73s Tom
Original message
From: Fred Jensen k6...@foothill.net
Date: 28/07/2014 17:06 (GMT-05:00)
To: Elecraft Reflector elecraft@mailman.qth.net
Subject: [Elecraft] K3 Commands
The latest version of WriteLog (10.80) includes the capability of sending K3
commands via your PC keyboard. I was interested in sending the CW AUTO SPOT
command using the F12 key on my PC keyboard. The serial command for that is
SWT42;. I'm sure some of you have other commands that you might like
7 matches
Mail list logo
