Re: [Elecraft] K3 ERR TXF

I'd like to thank Dale, at Elecraft, for helping me work through this problem. Possibly the steps we went through may help someone who runs into a similar problem. Items in quotes are my thoughts/explanations. This is a first time issue for me, and I would consider it quite a rare occurrence based

Re: [Elecraft] K3 ERR TXF

Julius, I'm sure you mean an 807. 813s are non-alcoholic. Monty K2DLJ 7) Save to new working configuration. 8) Test again, heck if only for peace of mind. If good, pop open an 813 and do a little jig (wired jig preferred... hihi) ) 73, Julius - Julius Fazekas N2WN

Re: [Elecraft] K3 ERR TXF

Think mine fermented after sitting on the shelf for 40 years - Julius Fazekas N2WN Tennessee Contest Group http://www.k4ro.net/tcg/index.html Tennessee QSO Party http://www.tnqp.org/ Elecraft K2#4455 Elecraft K3/100 #366 Elecraft K3/100 -- View this message in context:

[Elecraft] K3 ERR TXF

Made a couple SSB QSOs prior to the start of WPX and one QSO in the contest itself, but now am getting ERR TXF anytime I try to key the rig. Also, not getting any power out to speak of. the pre contest QSOs were LP, the first contest QSO QRP. Checked all the settings, both directly and with the

Re: [Elecraft] K3 ERR TXF

Julius, ERR TXF indicates that the wrong filter is selected for SSB. It must be the 2.7 or 2.8 kHz filter. You can check usijng K3 Utility or directly with the K2 menu. 73, Don W3FPR On 3/23/2012 8:59 PM, Julius Fazekas n2wn wrote: Made a couple SSB QSOs prior to the start of WPX and one QSO

Re: [Elecraft] K3 ERR TXF

I've done that already Don. I've checked it via CONFIG and the Utility. The correct filter is selected, all the settings are correct. It was working fine, then this error popped up. Apparently the filter is fine, as it works on RX. 73, Julius n2wn - Julius Fazekas N2WN Tennessee

[Elecraft] K3: ERR TXF help with info

Hi- On SB the rig works correctly. On FM and AM when I trigger the VOX I get the ERR TXF message. I have a K3 with 12, 2.7, 500, 200 filters beginning at slot 1. CW, Data, AM and SSB modes are set for FLTX FL2; FM is set for FLTX FL1. FL1 is set to ON for FM; FL2, 3 and 4 are on for other

Re: [Elecraft] K3: ERR TXF help with info

...On FM and AM when I trigger the VOX I get the ERR TXF message. I have a K3 with 12, 2.7, 500, 200 filters beginning at slot 1. The FM filter in slot 1 must be set to 13.0. I am uncertain if AM Tx is supported with any filter other than 6 kHz at the moment. 73, Lyle kK7P

[Elecraft] K3 ERR TXF MESSAGE

Having a senior moment, I can't transmit. Keep getting an error message.ERR TXF. I corrected this when I first got the K3. But can't remember what I did. Thanks Don..w2xb -- View this message in context: http://n2.nabble.com/K3-ERR-TXF-MESSAGE-tp666938p666938.html Sent from the Elecraft

Re: [Elecraft] K3: ERR TXF

Theodore Wong wrote: I get this error when transmitting. Happens on all bands into a dummy load. It was transmitting fine last night. BTW thanks to all who helped me on the KAT3 tuning question. Check the filter settings CONFIG:FLx BW and CONFIG:FLTX SSB. I got this after playing

Re: [Elecraft] K3: ERR TXF

Almost, but not quite. Only the 2.7 or 2.8 filter will work for now as the TX filter for all modes except for AM, where the 6 kHz filter is used. - 73, Greg - AB7R Whidbey Island WA NA-065 K3#0009 On Wed Jan 30 0:58 , G4ILO sent: Theodore Wong wrote: I get this

[Elecraft] K3: ERR TXF

I get this error when transmitting. Happens on all bands into a dummy load. It was transmitting fine last night. BTW thanks to all who helped me on the KAT3 tuning question. Regards, Tedd K6OI ___ Elecraft mailing list Post to: