I have been using a HEIL proset with my K3S since I built it.
I have not had any problems with it.
John Paul // AB4PP
On Sun, Aug 6, 2023 at 8:11 PM Tom & Barb Valosin
wrote:
> Eric,
>
> Ever since I got my K3 (used) about 9 years back I have been using a
> Heil Proset.
>
> Connects into front
Eric,
Ever since I got my K3 (used) about 9 years back I have been using a
Heil Proset.
Connects into front mic - jack and phones. Seems to work well. I have
been happy with it.
Tom, WB2KLD
__
Elecraft mailing list
Home: http://ma
On Mon, 7 Sep 2009 09:49:25 -0700 (PDT), Hector Padron
wrote:
>Go to your local audio store and get a Sony MDR-V150 for little less than 20
>bucks and those will last forever and sound better than the Heil ones,that's
>what I have been using for about 8 years now.
>
>AD4C
>
[snip]
I've been us
ot;. --
Albert Einstein
--- On Mon, 9/7/09, Ken Waites wrote:
From: Ken Waites
Subject: [Elecraft] K3 Headset
To: elecraft@mailman.qth.net
Date: Monday, September 7, 2009, 4:13 PM
I am done with Heil headsets.
I have had 3 that had failures in the wiring, impossible to fix on my own.
Headp
I am done with Heil headsets.
I have had 3 that had failures in the wiring, impossible to fix on my own.
Headphones: SONY MDR 7506, Elecraft hand mike.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Hel
Per the discussion a couple of weeks ago regarding lightweight headsets
for the K3, I decided to look for the cheapest one I could find that
would still give good results. Amazingly, I found a really lightweight
computer headset for $10 at Tiger Direct that has foam covered
earphones, a foam
Thanks to all who replied.
Yes, I know that it works OK with SPKRS=2, however I would like to
use SPKR=1 so that I can have both the main and sub RX audio
coming from the internal LS.
However, I would also like to use the headphones at the same time,
even if it is a combined audio to both left and
Try it with CONFIG:SPKRS set to 2. Works here.
73,
Ken K3IU
Stewart Baker wrote:
Since fitting the 2nd RX I have been exploring the audio settings
and find that:-
To get 1st & 2nd RX audio thru the speaker I have SPKRS=1.
This is fine, however if I have SPKR+PH=YES, then I only get audio
fro
Since fitting the 2nd RX I have been exploring the audio settings
and find that:-
To get 1st & 2nd RX audio thru the speaker I have SPKRS=1.
This is fine, however if I have SPKR+PH=YES, then I only get audio
from the LH headphone.
With SPKR+PH=NO, I get audio from both LH and RH headphones.
Is t
OTECTED]>
To: "hank k8dd" <[EMAIL PROTECTED]>
Cc:
Sent: Thursday, August 07, 2008 3:53 PM
Subject: Re: [Elecraft] K3 :: headset choice
You all might pass along what your EQ settings were changed to so there
is a point of reference for everyone.
Mike/aj9c
hank k8dd wrote:
d the
headset
has a fair amount of passive noise reduction. I'd give them a 5 out
of 5.
Also another happy camper here.
72 73HankK8DD
- Original Message - From: "Steve Jackson" <[EMAIL PROTECTED]>
To:
Sent: Thursday, August 07, 2008 10:07 AM
Subject: [Elec
nkK8DD
- Original Message -
From: "Steve Jackson" <[EMAIL PROTECTED]>
To:
Sent: Thursday, August 07, 2008 10:07 AM
Subject: [Elecraft] K3 :: headset choice
I needed a new headset to go with my new K3. I decided to experiment, since
I wanted something different, but i
I needed a new headset to go with my new K3. I decided to experiment, since I
wanted something different, but it had to be *very* nice in order to 'beat' the
Heil Pro-Set Plus which was the alternative. My requirements: extremely
comfortable, great aesthetics, well-made, top sound performance,
be unsightly.
Dick, K6KR
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of KB1PXD
Sent: Friday, July 04, 2008 8:57 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 headset question
Ok, so correct me if I'm mistaken. If I order the pr
Ok, so correct me if I'm mistaken. If I order the proset-K2 through
Elecraft for my K3, I'll have all necessary connections to operate the
headset? However, I'm assuming that I'll be limited to VOX and no
PTT until I pickup a pedal, etc., which I assume will attach the existing
headset?
Thanks,
On Fri, 4 Jul 2008 08:07:04 -0700 (PDT), Tom Carney wrote:
>I just use a cheap PC headset. Works fine, no soldering. Just plug it in
>the back jacks and set the mike for bias.
Yes. Several years ago, I bought five Plantronics computer headset/mic
combos at a hamfest, and made connector adapter
KB1PXD wrote:
>
> Greetings,
> My K3 will be shipped out any day now! (woo-hoo)
> I've decided to pickup a Heil headset, but I'm not sure if I should
> go with the Elecraft proset-k2, or just run out to HRO and grab
> a proset-4, etc. Questions:
>
>
I just use a cheap PC headset. Works fin
Does anyone know of an adapter that will take a Kenwood 8-pin mic jack
and set things up so it will fit into the 3.5mm mic jack on the back?
Or is this one of those things that I'd have to make...
On Thu, 2008-07-03 at 19:39 -0500, Tom Childers, N5GE wrote:
> On Thu, 3 Jul 2008 17:23:20 -0700 (PDT
On Thu, 3 Jul 2008 17:23:20 -0700 (PDT), KB1PXD <[EMAIL PROTECTED]> wrote:
>
>Greetings,
>My K3 will be shipped out any day now! (woo-hoo)
>I've decided to pickup a Heil headset, but I'm not sure if I should
>go with the Elecraft proset-k2, or just run out to HRO and grab
>a proset-4, etc. Questi
Greetings,
My K3 will be shipped out any day now! (woo-hoo)
I've decided to pickup a Heil headset, but I'm not sure if I should
go with the Elecraft proset-k2, or just run out to HRO and grab
a proset-4, etc. Questions:
1.) If I decide to pick one up at at HRO, can I just pickup the adapter
that
20 matches
Mail list logo