Hi Arne,
A few years ago I had an issue with one of the push buttons at one of
the encoders (K3, SN #1160). This problem resulted in a complete mix-up
of the function assignments of almost all buttons in the front panel -
so I had to repair it. I decided to exchange all 4 encoders - because
the
Hello Arne
I had the exact sam situation with one of my two K3s serial 377 something .The
power control sometimes did not work or if I wanted to increase power it went
backwards, same with the CW pot. Elecraft suggested to replace them , It's not
fun at all and requires patience, pay attention
Arne,
Yes, I also suspect the encoder has gone bad.
You can replace it yourself if you have de-soldering capability. If
not, your K3 will have to go back to Elecraft. Contact
pa...@elecraft.com to order the encoder, or if you prefer to send it in
for repair, contact supp...@elecraft.com to
Hello,
The CMP/PWR-Control on my K3 has ceased working. I can switch between the
two functions by tapping the knob and the present setting of Compression and
Power respectively shows up shortly on the display. But nothing happens when
turning the knob and I am stuck with the present settings.
4 matches
Mail list logo
