On Mon, 23 Jun 2008 10:20:10 -0400, I wrote:
50 +16
100+16
200+16
400+10
800+9
1600 +1
2400 -6
3200 -6
Ok, that didn't work real well. Or should I say, it worked too well...
I set these up on a noisy, empty band along with my room a/c providing
lots of ambient noise.
On Sun, 22 Jun 2008 10:56:10 -0700, Lyle KK7P wrote:
Don't forget the dual passband CW feature of the K3.
In CW mode, just DUAL PB and adjust the width to the total width you
wish to monitor. Your preferred pitch will be accentuated, but you can
still get band context.
73,
Lyle KK7P
I'm
RX eq for CW
Drew:
I have my sidetone pitch set for 550 Hz. The RX EQ is adjusted so that the
400 HZ band (button 4) is at +2 and the others above that are all set
for -16. This eliminated a lot of QRN and other band noise plus gives a
slight peak near the IF center. Speaker choice will play
Add my name to that, for future firmware addition.
David
G3UNA
So RX equalization is most useful to those of us who like a wide CW
filter b/w.
Yes, Bud, it would be very nice if the RX eq was mode specific.
73,
Drew
AF2Z
___
Elecraft
I cut some of the higher bands as he did in order to reduce noise. But
not too much, in order to hear signals farther off freq I generally
use a pretty wide xfil to hear more of the adjacent signals. (There
aren't too many of them out there lately.)
Don't forget the dual passband CW feature of
Just curious, has anyone found RX eq to be useful for CW? Just
wondering what settings people like, if not flat.
73,
Drew
AF2Z
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
in this
decision. 73
Steve Ellington
[EMAIL PROTECTED]
- Original Message -
From: [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Saturday, June 21, 2008 9:16 AM
Subject: [Elecraft] K3 RX eq for CW
Just curious, has anyone found RX eq to be useful for CW? Just
wondering what settings
@mailman.qth.net
Subject: Re: [Elecraft] K3 RX eq for CW
Drew:
I have my sidetone pitch set for 550 Hz. The RX EQ is adjusted so that the
400 HZ band (button 4) is at +2 and the others above that are all set
for -16. This eliminated a lot of QRN and other band noise plus gives a
slight peak near
Bud
Nope. When you change from CW to SSB you'll have to redo those EQ settings.
Steve Ellington
[EMAIL PROTECTED]
- Original Message -
From: Bud Semon N7CW [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Saturday, June 21, 2008 6:44 PM
Subject: RE: [Elecraft] K3 RX eq for CW
9 matches
Mail list logo
