I use my K3 daily on 6 m but you need one of the preamps or a good GAsFEt
preamp with it…for DX activities.
Its fine without for local stuff… especially in urban areas..
73 Dana VE3DS
__
Elecraft mailing list
Home:
If anyone needs the external 6m preamp for an original K3, I have one I
would part with for a reasonable price.
Tim,
AE6LX
On Mon, May 24, 2021 at 7:33 AM Linda M wrote:
>
> __
> Elecraft mailing list
> Home:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Thanks everyone!
I Do have the the transverter interface in my upgraded K3
I was just curious!
Ron W5SUM
Sent from my iPhone
> On May 23, 2021, at 11:16 PM, Jim Brown wrote:
>
> On 5/23/2021 7:35 PM, Ronnie Hull wrote:
>> I have a K3 with every upgrade available. What are your opinions of
On 5/23/2021 7:35 PM, Ronnie Hull wrote:
I have a K3 with every upgrade available. What are your opinions of such a K3
on 6M?
It's quite good with either the outboard PR6 preamp they sold, or the
preamp built into the transverter interface introduced with the K3S.
When I got my first K3 in
Good evening folks!
I have a K3 with every upgrade available. What are your opinions of such a K3
on 6M?
Rx sensitivity is what I’m referring to
Thanks and 73
Ron W5SUM
Sent from my iPhone
__
Elecraft mailing list
Home:
I've seen the postings about providing power from the K3 Aux 12v socket - is
there enough to drive the 6m Pre-amp and the P3?
73 de M0XDF, K3 #174, P3 #108
--
Don't say you don't have enough time. You have exactly the same number of
hours per day that were given to Helen Keller, Pasteur,
Yes. The 12 V aux current should be kept below 500 mA, and the P3+PR6
should be well below this.
Wayne
N6KR
On Aug 21, 2010, at 1:56 AM, David Ferrington, M0XDF wrote:
I've seen the postings about providing power from the K3 Aux 12v
socket - is there enough to drive the 6m Pre-amp and
Would it be safe to add the W2 to this mix?
K0PP
Yes. The 12 V aux current should be kept below 500 mA, and the P3+PR6
should be well below this.
Wayne
N6KR
On Aug 21, 2010, at 1:56 AM, David Ferrington, M0XDF wrote:
I've seen the postings about providing power from the K3 Aux
I would think we users are getting to a point where a good, automotive relay
designed for continuous duty usage would be a good idea here. Simply use
the 12v auxilliary power to feed the coil of the relay and let the contacts
of the relay feed power from our 12v supplies. I don't remember the
Thanks Wayne - just need to make a 'Y' lead now :-)
73 de M0XDF, K3 #174, P3 #108
--
Why should I fear death? If I am, death is not. If death is, I am not. Why
should I fear that which cannot exist when I do?
-Epicurus, philosopher (c. 341-270 BCE)
On 21 Aug 2010, at 17:20, Wayne Burdick wrote:
For that application even Radio Shack has 2. Numbers 275-226 275-218.
My local NAPA store also had them in blister packs but I have not
checked in awhile.
They were a little more in cost than Radio Shack.
A relay in this usage is a mechanical current amplifier.
73,
Bob
K2TK
On 8/21/2010
I went to radio shack and got the relay I needed. I then built a box
that will pass 10A to several RCA connectors (I wanted to be able to
plug the units plugged into the box into the K3 when portable with a sub
set of my goodies). Anyway I then also got a few of the cheapy cores
that Radio Shack
I've answered my own question ...
No, the three units add up to about 1.2A ... Far too
much current for the 12VDC OUT jack to support.
73! Ken - K0PP
Would it be safe to add the W2 to this mix?
K0PP
Yes. The 12 V aux current should be kept below 500 mA, and the P3+PR6
should be
I will add my voice to the unanimous use a preamp crowd.
I also run the PR6 on 6M, and agree it's an excellent preamp. It also
integrates seamlessly with the K3, which isn't the case with a third party
preamp. More often than not I also run the internal preamp as well. The
internal preamp by
I don't know what the problem with others who think that the K3 is hard
of hearing on 6m. I have not had any problems working DX with a 5ele
yagi up only 24 feet this past summer. Some of the signals were weak
but I had no problem picking them out of the noise. I was using the K3
internal pre-amp.
Hi Group,
My PR6 pre-amp arrived here today and I've got it connected.
I'm not sure what I'm doing wrong, but I simply can't get it to work.
12v is taken from the AUX supply. (The 12v is good)
The White CTRL lead is connected to pin 11 on ACC
On the 6m band I've set CONFIG: DIGOUT1 to ON
I've
Being a 6m operator I have a few specific questions:
1. Are the 6m TX and RX circuits diiferent from the HF
ones?
2. What is the noise figure on 6?
3. On a K3 with the ATU, does the ATU tunes on 6 or is
it bypassed?
4. Is the antenna out different on 6 and HF, the same
or configurable?
5. Does the
18 matches
Mail list logo