Many thanks to all of those who took the time and trouble to answer.
I took the SignaLink apart and re-seated the module. I also re-checked my ALC
setting and all the others on the rig.
I had come across a very useful document by Jason K8ZT and followed his
instructions to the letter. I a
You have the Signalink w/the module or the one w/jumpers? Several of my friends
have had trouble w/the Signalink w/the module, I have two Signalinks, both
w/jumpers and don’t have any issues.
73 de Jose Douglas KB1TCD
Sent from my iPad
> On Apr 4, 2020, at 4:21 AM, David Bondy wrote:
>
> I
David,
I think you should check the jumpers in the SignaLink. Also make
certain the level controls for the SL soundcard are set correctly in the
computer.
Or simply use another USB soundcard - the K33 has built-in isolation
transformers.
Set the K3 LIN OUT level to about 10.
You apparently
I ask “why use a SignaLink with the K3?”
The K3 already has buffered Lin In and Line Out. Separate settings for in/out
for each mode.
The one item to pay attention to is transmit audio level. You should set the
power out by using the Per knob on the K3 front panel.
Then adjust the audio to
I have been using digital modes for years and have a number of SignaLink USB
devices which have all worked very well with a variety of rigs.
I am new to the K3 and have bought the Tigertronics cable and module set to
allow me to connect a SignaLink USB to the rear Line In/Out and PTT connection
Elecrafters, thanks for the input.
--
Ohne CW ist es nur CB..
73, Martin DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.n
On 10/24/2018 11:51 AM, Joe Subich, W4TV wrote:
"Sharp and narrow" generally means too much high frequency (1600 - 3200
HZ) audio and not enough mid range (400 - 800 HZ) audio.
Or that the other station is confusing ham radio with broadcasting. Some
hams want to hear full bass -- that's fine i
> saying the audio is sharp and narrow .
"Sharp and narrow" generally means too much high frequency (1600 - 3200
HZ) audio and not enough mid range (400 - 800 HZ) audio.
With my CM-500 I use the following two sets of TX EQ:
Normal operation "DX"/Contest Operation
50
I've gotten good reports with the following:
Mic Gain 25
compression 10
I set rear panel bias on for the electret element.
My TX EQ is
0.05 -9
0.10 -6
0.20 0
0.40 +2
0.80 +4
1.60 +5
2.40 +2
3.20 -3
I use the same EQ settings for both the CM500 and for the MC-60
connected to the front p
Mic select rpl bias
Mic gain 17
Cmp 17
Good place to start.
Sent from my iPhone
...nr4c. bill
> On Oct 24, 2018, at 10:31 AM, Martin wrote:
>
> Elecrafters,
> i'm preparing the clubstation for the CQ WW Contest. I get Audio-reports
> saying the audio is sharp and narrow . I would like to se
This article is for the KX3, but the TX EQ settings are from K3 users. I don’t
know if the DVR trick works on the K3, but it is worth trying.
https://observer.wunderwood.org/2015/09/09/transmit-audio-and-compression-with-the-elecraft-kx3/
wunder
Walter Underwood
wun...@wunderwood.org
http://obse
Elecrafters,
i'm preparing the clubstation for the CQ WW Contest. I get Audio-reports
saying the audio is sharp and narrow . I would like to set the K3 for a
good and readable audio. Would the Yamaha CM 500 users share their
settings? Thanks.
--
Ohne CW ist es nur CB..
73, Martin DM4iM
__
t;> To: Jay
>> Cc: Elecraft@mailman.qth.net
>> Subject: Re: [Elecraft] K3 Settings
>>
>> My understanding is this:
>> Unfortunately, no, only that K3. This is because the calibration settings
>> unique to that radio are also part of what is saved / restored.
ed
> Sent: Sunday, March 03, 2013 5:11 PM
> To: n...@arrl.net; Elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3 Settings
>
> Hi Dave,
> I'm pretty sure AGC, NB and NR are the same on the main and the sub
rx.
> Double tapping A>B sets the filter settings (and freqs)
> To: Elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3 Settings
>
> It is understood that you can't clone one K3 from another, but I have
> another
> question:
>
> Can you clone the Main RX to the SUB? I would like to be able to make
> the
> SUB exactly lik
It is understood that you can't clone one K3 from another, but I have another
question:
Can you clone the Main RX to the SUB? I would like to be able to make the
SUB exactly like the MAIN, especially AGC, NB, Width, Shift, etc. It would be
great if this could be done with a single command of
13 3:21 PM
Subject: Re: [Elecraft] K3 Settings
No. The data is stored by K3 serial number.
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Sun, 03 Mar 2013 13:33:11 -0800, "Jay" wrote:
If I have a K3 on a network with a back up file for Settings, can
No. The data is stored by K3 serial number.
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Sun, 03 Mar 2013 13:33:11 -0800, "Jay" wrote:
>If I have a K3 on a network with a back up file for Settings, can this file
>be used with the Utility for another K3 to
> boun...@mailman.qth.net] On Behalf Of David F. Reed
> Sent: Monday, 4 March 2013 10:36 a.m.
> To: Jay
> Cc: Elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3 Settings
>
> My understanding is this:
> Unfortunately, no, only that K3. This is because the calibration settings
> uniq
My understanding is this:
Unfortunately, no, only that K3. This is because the calibration
settings unique to that radio are also part of what is saved / restored.
I would love to see such a facility as well.
73 de Dave, W5SV
On 3/3/13 3:33 PM, Jay wrote:
If I have a K3 on a network with a ba
If I have a K3 on a network with a back up file for Settings, can this file
be used with the Utility for another K3 to set it up without having to go
through all the menus?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Hello List and Robin,
Robin asked for some of my settings that I use on my K3 regarding the
new NR in Firmware 3.27, and I thought that it may help the Group to
post them here.
These are answers to Robins questions, so keep this in mind.
AND...I use my K3 almost 100% as an IF for VHF Bands, so
Fellow Elecrafters,
I am also very interested in any assist with setting up the K3 for optimum
performance. I spent a bit of time in the CQWW this last weekend with the K3
and a number of other radios to compare and to try to tweak the K3. I have not
been as successful as I would like. Of co
Hi,
I use mic gain 20, comp 20 with firmware 1.96/173. Don't forget to set mig
gain L and bias on. Great reports.
73, John, W2GW
- Original Message -
From: "Patrick Taylor" <[EMAIL PROTECTED]>
To:
Sent: Friday, May 16, 2008 7:30 PM
Subject: [Elecraft] K
This has probably already been covered but I would like some suggestions of
a good starting point for setting mic gain and compression for a MH-2 mic.
Thanks,
Pat W3HVG
K3 834
K2 503
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You mus
25 matches
Mail list logo