So do a lot of others but problems are with the K3.
On Tue, Jan 21, 2020, at 2:53 AM, Paul Kiciak wrote:
> I use CAT between my KX3 and Pi 4B and WSJT-X and JTDX running
> on the Pi both work fine.
>
> Paul N2PK
> __
> Elecraft mailing l
I use CAT between my KX3 and Pi 4B and WSJT-X and JTDX running
on the Pi both work fine.
Paul N2PK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecra
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
Me too.
Lee K0WA
On Mon, Jan 20, 2020, 12:45 PM Jim Brown wrote:
> On 1/20/2020 8:55 AM, AL7CR wrote:
> > You might be able to use VOX.
>
> VOX is a perfectly good way to key the radio. I've used nothing but VOX
> for SSB, RTTY, and WSJT modes for at least 15 years.
>
> 73, Jim K9YC
> _
I’ve always used CAT control for PTT with 100% success with all of my software
applications.That way I can switch between SSB and Data and find it not
necessary to make any radio adjustments.
Bob, K4TAX
Sent from my iPhone
> On Jan 20, 2020, at 2:41 PM, Wes wrote:
>
> So have I, perha
So have I, perhaps even longer. The only downside with Elecraft radios is that
VOX audio sampling follows the mic/line gain setting and is of course affected
by them. Without judicious setting of digital mode line level/sound card
level/WSJT "power level" settings, there is a nonsensical need
On 1/20/2020 8:55 AM, AL7CR wrote:
You might be able to use VOX.
VOX is a perfectly good way to key the radio. I've used nothing but VOX
for SSB, RTTY, and WSJT modes for at least 15 years.
73, Jim K9YC
__
Elecraft mailing list
Home
I have tried but rig TX control is seriously broken for the K3 in WSJT-X on the
Pi. Online sources all point fingers at each other and I could find no
solutions. Flrig control works perfectly but NOT with WSJT-X. You might be
able to use VOX.
Be ready for a major hassle.
On Mon, Jan 20, 202
Hi All.
Anyone have a K3 usb and Raspberry Pi 4 working on WSJT-X! for FT4 mode.
I have a K3 converted to USB
Would be interested in setup etc!
Please share or email me direct if the bandwidth is t wide!
Oh, congrats Space-X !!
Regards
Ken.. G0ORH
Sent from my iPad
_
9 matches
Mail list logo