You might want to wait until after New Year's day to make that call.
All Elecraft folks in Watsonville will be off until after Christmas with
only a skeleton staff returning for the later part of the week, then off
again until after New Year's.
73,
Don W3FPR
On 12/23/2018 3:58 PM, N1VH
Thanks to everyone for your suggestions, I tried them all. After additional
sluething, I believe our K3S has an issue with the KIO3B board. The USB
Audio CODEC will not load or be recognized on any computer (CAT control
works fine and is recognized in the Elecraft K3 utility).
Additional
Marty,
Have you tried unplugging the USB cable, then plugging it back in.
Windows should recognize and activate the USB Audio CODEC.
Also make sure "Show Hidden Devices" is checked.
73,
Don W3FPR
On 12/22/2018 4:14 PM, N1VH wrote:
My radio club just replaced our pc's and we are now running
Thanks Doug,
I'll check the 'audio inputs and outputs' list again. If I remember
correctly, it only showed the internal sound card -mic and
speakers/headphone, no reference to the K3s or other USB Audio Codec.
73,
Marty - N1VH
--
Sent from: http://elecraft.365791.n2.nabble.com/
The FTDI drivers have nothing to do with the audio interface. Look in
device manager and see what you have under audio devices. If you find
some undefined devices, right-click, select driver, and click update.
If you need better step-by-step directions, I'd be happy to send you
very detailed
My radio club just replaced our pc's and we are now running Win10 Pro. The
K3S is recognized (com port and USB Controller) and works well with N1MM,
HRD and WSJT-X (CAT control). However, the USB Audio Codec is not being
loaded for the radio. Windows does not recognize the K3S sound card and
6 matches
Mail list logo
