__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
The lack of output power on both 10 and 12 meters suggests a problem in
either the lowpass filter (post-PA) or bandpass filter (pre-low power PA),
which in both instances is common to those two bands. I would check relay
activations on the input and output sides of both the BPF and LPF 10/12
meter
Just in the last few days my K3S (Serial No. 11048) has developed a fault
whereby there is little or no power out on the 12m and 10m bands even into a
dummy load. All other bands are fine. Any help would be appreciated.
__
Elecraft maili
Trying to work the WAE SSB contest this evening, my KPA500 and KAT500
showed high SWR. When I hit TUNE on the K3s the KAT tuned OK, but a
couple of times the K3s displayed FAULT 9.
I looked through the K3s docs, and I didn't find any reference to faults.
Can someone point me in the right direc
4 matches
Mail list logo