I suspect it’s a way to have more than 1 antenna connection without the KAT3.
Sent from my iPhone
...nr4c. bill
> On Nov 26, 2020, at 7:37 PM, David Olean wrote:
>
> Hello Don and Carl,
>
> I guess I was not very clear on this. I have a couple of K3s and all have a
> KANT3. I know what
Hello Don and Carl,
I guess I was not very clear on this. I have a couple of K3s and all
have a KANT3. I know what that board is. This board is a bare (un
populated) board that was made by someone to be a replacement for the
stock KANT3 but it has some added switching and routing capabilities
Dave,
If I am not mistaken, that board would be installed in a K3 that did not
have an ATU.
If you bought the K3 without the tuner and later installed the tuner,
that would be the reason you have it in your 'junk'.
73,
Don W3FPR
On 11/26/2020 6:03 PM, David Olean wrote:
I hope someone can
I hope someone can steer me in the right direction. I was trolling
through my junk and found a new un populated PC board. I must have
bought it from someone on the Elecraft reflector, but I have no memory
of any of it! All I have is the PC board and a printed sheet with a
parts list. By
Does anyone have an Elecraft KANT3 blank board that they no longer need?
I am repairing a K3 and need it to run the K3 without its KAT3 internal
tuner.
Thanks.
Ron Durie
WB4OOA
Elecraft K-Line
704-843-3681
WB4OOA at gmail.com
I need a KANT3 and SSB and CW filters. I have a project K3 I am working on.
Mike
AI4NS
On Sat, Aug 10, 2019 at 14:07 wrote:
> Send Elecraft mailing list submissions to
> elecraft@mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
Hello everyone,
I would like to purchase a KANT3 Antenna Input Module (Elecraft part
number E850248). This is the board that connects the antenna input to the
RF board. Perhaps you have upgraded to the KAT3 or KAT3A antenna tuner and
have the old KANT3 board left over. Please let me know
I would like to put a second SO239 antenna jack on my K3 (using a modified
KANT3) .Without opening up the K3 and looking at the signals/levels can one of
you digital wizards tell me what the sigs/levels are for SK3 and MISO3 .
Looking at the KAT3 it looks like maybe the U4 is required to use
This is the board you would have replaced in your K3 when upgrading to the
KAT3 antenna tuner. I'm looking for one to try something on, (not all or my
ideas work so don't want to sacrifice the one in the rig) so if you've got
one,
let me know what it would take to ship it to 24551.
Mark n2qt
I installed the KAT3 Internal ATU in my K3 during the blizzard of 2009.
I now have the KANT3 Antenna Input Module that I no longer need.
If anyone needs one, I'll ship it to you - CONUS ONLY - at no charge to you.
73 Merry Christmas,
H Cary, K4TM
LYNCHBURG, VA
K3-100 #3491, K2-100 #4991
The KANT3 is on its way to Rhode Island.
Thanks to all who replied.
73 and Holiday wishes,
H Cary, K4TM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Please can Elecraft clarify if there is any plan to upgrade the KANT3
board to provide switching between two SO239 antenna sockets? (In other
words, the same switching as the KAT3 but without the auto-ATU.)
Soon, sometime soon, sometime, maybe sometime, probably not, or never?
The answer
If you are buying a kit K3, and are considering adding a KAT3, you
may want to wait and order the KAT3 after you receive the K3. If you
order the kit without the KAT3 you will receive a KANT3 with it. If
you order a KAT3 with the initial order, you won't get a KANT3. If
you have a problem with
13 matches
Mail list logo