Bill
The station has a bank of 4 marine batteries and a 1 kw inverter backing up
the K3s, kat500, Steppir controller, Green heron rotor and the computer.
Power outages are a regular occurrence at this remote location in Upstate
New York, However; the first thing that would happen in this case w
.
Good luck.
Bill
K9YEQ
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Brian
D. Comer
Sent: Sunday, August 28, 2016 8:09 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KAT500 ant control (Brian D. Comer)
Expanding my problem a little more
Expanding my problem a little more. I have a remote that uses a KAT500 that
is now 3000 miles away. The KAT500 was calibrated to use the correct antenna
over all bands 160 to 6 meters at the specified increments (10 KHz 160 etc
and 20 KHz for the higher bands) For an unknown reason the KAT 500 has
If you have more than one antenna for a band (I did before we moved),
the KAT500 Utility allows you to enable them for a particular band and
choose which will be the default when the K3 goes to that band. If you
want the other(s), you press the ANT button on the KA%500, and it will
cycle throu
alf of Brian D. Comer
Sent: Friday, August 26, 2016 4:17 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KAT500 ant control
Can I change the KAT500 ant selection from the K3s
__
Elecraft mailing list
Home: http://mailman.qth.net/m
Can I change the KAT500 ant selection from the K3s
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://w
6 matches
Mail list logo