I ran into this exact issue caused by cable connections, specifically
the Y-cable that didn't allow the connector screws to join the cables.
Getting the Y-box from N6TV solved the loose cable problem.
73, Dennis NJ6G
On 10/30/2019 13:26, Jack Brindle via Elecraft wrote:
Jim;
Check the AUXIO
Jim;
Check the AUXIO cable to make sure it connects to the K3S and the KPA500 (or
KAT500) properly. This sounds like the Band1 signal may not be making proper
contact.
The KPA500 watches the K3S’s Band signals for its band selection when RADIO is
set to K3. If doesn’t see the combination for a
Jim,
I would suggest doing a Direct Frequency Entry into each of the ham
bands - no guarantee, but it has a chance of setting things straight.
73,
Don W3FPR
On 10/30/2019 3:57 PM, Jim Sheldon wrote:
Having a bit of trouble with the KPA500 following the bands out of the
K3S. For some reason,
Having a bit of trouble with the KPA500 following the bands out of the
K3S. For some reason, the other day I accidentally hit a button
combination on the K3S (not sure what I hit) and the KPA500 is now
thinking 7.0 MHz is 1.8 and some of the other bands aren't switching
correctly either. I ca
4 matches
Mail list logo