Received my KXDP2 about two weeks ago.
I can report that I too have issue with contact adjustment. After reading Toms
email, one of the contact posts was found to be loose. I cannot say the
contact screws are becoming loose, as they were readjusted to correct the
spacing issue caused by the
The CS40 is the smaller padded soft-case for the KX2 that is just a bit larger
than the radio.
http://store.lowepro.com/viewpoint-cs-40
The CS60 soft-case is about twice the internal volume as the CS40.
http://store.lowepro.com/viewpoint-cs-60
73,
Eric
/elecraft.com/
On 8/4/2016 5:06 PM,
Will do - thank you.
Tom, W1TEF
On 8/4/2016 5:27 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
Hi Tom - Before shipping the paddle, please make sure first to contact
our support team via supp...@elecraft.com or on the phone to get a
return Service Authorization (RSA) tracking number, return
Hi Tom - Before shipping the paddle, please make sure first to contact our
support team via supp...@elecraft.com or on the phone to get a return Service
Authorization (RSA) tracking number, return instructions and our correct return
shipping address information.
That will speed its repair and
Wayne,
I am constantly amazed at the quality Customer Service Elecraft provides
it's customer base. How many people can say they got a reply from one
of the guys who owns the company?
Thank you very much - the paddles will be on their way tomorrow.
Thanks for the information - I appreciate it.
> On Aug 4, 2016, at 3:37 PM, Wayne Burdick wrote:
>
> Hi Tom,
>
> Your KXPD2 should not have any issue with contact screws loosening over time.
> Please return them for rework. Sorry about that.
Mine arrived yesterday and I had to have Chris at Elecraft explain to me
Hi Tom,
Your KXPD2 should not have any issue with contact screws loosening over time.
Please return them for rework. Sorry about that.
We needed a new paddle was for the KX2 because it's a much smaller radio. Some
operators using a KXPD3 with the KX2 find that they have to hold the radio in
I have both, am primarily a CW operator and this is my impression.
The KXPD2 has "issues" - at least for me. The contact posts keep
loosening up -
it doesn't matter how hard I tighten them (I'm afraid of over torquing
the screws
but they are snug), they loosen up. I tried non-hardening
Anyone have a KXPD3 for sale? $135 just seems too much.
Kurt, W7QHD
> On Aug 4, 2016, at 10:22 AM, Sid Frissell wrote:
>
> Well, I guess I've wrung all the opinions out of you re. KXPD 2 vs KXPD3.
> Seems like the KXPD2 is preferred.
> Thanks to all who commented
Well, I guess I've wrung all the opinions out of you re. KXPD 2 vs KXPD3.
Seems like the KXPD2 is preferred.
Thanks to all who commented on and off list.
Sid, NZ7M
Sent From Sid Frissell's iPad
__
Elecraft mailing list
Home:
Mike,
I also have the Adventure paddle.
Could you possibly provide more information on the modification? This is the
way Begali should have designed it...
Thank you in advance.
-Dave
KW4M
email gene...@bellsouth.net
The Begali Adventure paddle is the way to go!
I modified my key with a
Sid,
My friend with the Begali Adventure just reminded me that it, in fact, is a
hybrid in that it CAN be mounted mechanically to the KX3 (in the same position
as the KXPD3) or not. In either case, the cable plugs into the key jack on the
left side of the KX3. TNX to K9ZTV for keeping me
Sid,
I have an early KX3 (S/N 112) and really like the KXPD3, except that it had
contact issues in the high humidity environment that I encountered in
summertime Missouri and Arkansas SOTA activations. I then went with the Palm
Radio Mini-Paddle with a special bracket that mounts to the KX3
The Begali Adventure paddle is the way to go!
I modified my key with a 4-pin plug purchased from Digikey that mounts and
plugs in to the KX3 just like the KXPD3 does so there is no dangling cable
that has to plug into the KEY jack on the left side of the radio.
Mike AC6JA
In a message
Hi guys
I’m planning on buying a KX3 in the near future. Some time ago someone on the
reflector said they thought the new KXPD2 paddles were better than the KXpd3
(less noisy I think he said.) Any pf you who have KX3’s and now also KX2 can
now make that comparison. So what’s the verdict?
15 matches
Mail list logo