Cliff
You may have discovered this by now, but in my experience you need to remove
the spacers too, not just unscrew them from the front panel.
A Happy New Year to you too!
73 Stephen G4SJP
On 01/01/2009 04:09, MASH mash4...@mailsent.net wrote:
New Year Greeting Everyone:
It has been
Cliff,
The KX1 has no fuses inside, one should always fuse the power cord.
The board removes quite easily, but yes, the paddle jack does catch a
bit on one side of the enclosure top.
Just grasp the paddle jack and pull that side of the board out of the
enclosure first, the rest will follow.
As Don said, you just need to bend the case out a little to clear the keyer
connector. You didn't mention it, but I assume you removed the tuning knob.
I had a similar failure to turn on a while ago and found that the switch
wasn't working. I just sprayed it with contact cleaner and worked
New Year Greeting Everyone:
It has been a longtime since I buit the KX1. I turned on the
radio to find it would not turn on. The lamp goes on. I am
trying to find the fuses. They must be on the underside of the
board. I am having trouble removing the board. I removed the 3
screws from the front
4 matches
Mail list logo
