Hi Jim,
I purchased the PRO-Audio KX31 heat sink for my KX3.
After looking at the available designs at the time, the choices were narrowed
to two. The KX31, and VE7 designs. The larger ultimate KX32 and VE7,nor the
improved Elecraft designs were available at the time.
The deciding reason I
2017 5:14 pm
Subject: Re: [Elecraft] KX3 Heat Sink
My preference is for the ProAudio Engineering sink.
FWIW
73
Ken - K0PP
On Aug 4, 2017 3:09 PM, <k1...@k1szo.com> wrote:
> Hi Jim,
>
> I recently purchased my KX3 and intend on doing a lot of digital modes. I
> looked
From the Elecraft site, "KX3 Heatsink Upgrade Kit. Started shipping with S/N
7292 for kits, S/N 7255 for factory assembled. $39.95”
http://www.elecraft.com/order_form_parts.htm#kx3
Upgrade instructions are here:
Yes (easily).
Wayne
N6KR
> On Aug 4, 2017, at 4:54 PM, Rose wrote:
>
> Hi Wayne,
>
> Can the new / current KX3 heatsink be swapped / added to an early KX3?
>
> 73
>
> Ken - K0PP
>
> On Aug 4, 2017 17:43, "Wayne Burdick" wrote:
> David,
>
>
Hi Wayne,
Can the new / current KX3 heatsink be swapped / added to an early KX3?
73
Ken - K0PP
On Aug 4, 2017 17:43, "Wayne Burdick" wrote:
David,
The new heat sink roughly doubled key-down time in our lab tests. I’d
suggest you try it as-is before investing in a
Wayne. What serial number did you first install the new heat sink on
the KX3?
73,
David
KC1DNY
On 8/4/2017 7:42 PM, Wayne Burdick wrote:
David,
The new heat sink roughly doubled key-down time in our lab tests. I’d suggest
you try it as-is before investing in a third-party heat sink. I use
David,
The new heat sink roughly doubled key-down time in our lab tests. I’d suggest
you try it as-is before investing in a third-party heat sink. I use RTTY at
full power on my KX3 with just the new stock heat sink and have never had an
issue.
73,
Wayne
N6KR
> On Aug 4, 2017, at 2:08 PM,
My preference is for the ProAudio Engineering sink.
FWIW
73
Ken - K0PP
On Aug 4, 2017 3:09 PM, wrote:
> Hi Jim,
>
> I recently purchased my KX3 and intend on doing a lot of digital modes. I
> looked into 3rd party heatsinks, but was notified that Elecraft uses a new
>
Hi Jim,
I recently purchased my KX3 and intend on doing a lot of digital modes.
I looked into 3rd party heatsinks, but was notified that Elecraft uses a
new improved heatsink that wraps around the bottom of the KX3.
So my question to you is, do you have the newer KX3 Elecraft heatsink or
Of all of the aftermarket KX3 heatsinks, the VE7FMN has the most surface area
and mass- read that, it will be the coolest albiet heaviest heatsink you can
add to the rig. I have one on mine, run RTTY and PSK31 a lot and never notice
much in the way of heat at all with the heatsink.
Look at
I've been doing a lot of FT-8 using my KX3 and my KXPA100 at 20 watts, and have
noticed that the KX3 is heating up quite a bit and is almost hot to the touch.
The KXPA100, while warm, appears to be okay. Should I consider purchasing a
heat sink for the the KX3? If so, what products in your
Hi all,
In response to feedback from KX3 users, we have improved the transceiver's heat
sink, without significantly changing its outside dimensions. The new heat sink
has twice the surface area and much greater mass, using an 'L' configuration
that places part of the heat sink underneath the
Wayne, it doesn't sound like the KX3
heat sink addition will impact Rose's covers or cases and Scott's end
plates or front cover. Can you confirm?
A photo on the website might save the staff time in the long run. (:-)
73
Ken Kopp - K0PP
Hello elecrafters,
I have recently purchased a KX3 heat sink from John KB8UHN. Product is very
nice and well fit to my KX3. The price was about USD40. His contact is good
at http://www.qrz.com/
I have no business connection with him but am just a happy user. For details,
could you please
Received Fred’s heat sink yesterday and installed it on the KX3 today.
Beautifully done and fits like a glove. It took about 10 minutes to install and
the powder coat finish matches the radio nicely, and all covers still fit
nicely. Thank for a great job Fred. Now I’ll try to do some thermal
Due to the overwhelming response, I'm temporally out of stock for the CALL
SIGN option A much bigger batch is in the works Watch for my ebay
listings or send me an email n8...@arrl.net to be notified of
availability. BTW the no call sign options are still available.
Check out my listings on eBay for my new heat sinks with engraved
callsign. Just do a search for kx3 heat sink. They will also be
available without callsign soon. Thanks Gary, N8WTT
__
Elecraft mailing list
Home:
17 matches
Mail list logo