Re: [Elecraft] KX3 on 2 Meters

aft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Seney Sent: 21 January 2016 11:54 To: Elecraft Elecraft Subject: [Elecraft] KX3 on 2 Meters I have a KX3 and am curious to hear from users that have the 2 meter module installed how you find the performance with the various modes.

[Elecraft] KX3 on 2 Meters

I have a KX3 and am curious to hear from users that have the 2 meter module installed how you find the performance with the various modes. Any good DX with SSB or CW? 73, John www.wd1v.com __ Elecraft mailing list Home:

[Elecraft] KX3 on 2 meters

I would to use an existing 2 meter xvtr with the KX3. No problem except my primary use would be for satellite operation. That is in the 145.8 to 146.0 mhz. That would correspond to 29.8 to 30.0 mhz, which is out of band for the KX3. So, is there a way to allow transmit just above the ten meter

Re: [Elecraft] KX3 on 2 meters

I use my KX3 on 146.805 repeater with no problem. I think the firmware is a little smarter - you tell it you have a transverter connected (up to 10, I believe) and it's cared for. Monty K2DLJ I would to use an existing 2 meter xvtr with the KX3. No problem except my primary use would be

Re: [Elecraft] KX3 and 2 Meters

Hello Steve, It sounds like the menu is set up for a 2m transverter. Go into the menu and find XV1 ON, and make sure the selection is 'no' (before making a change, you have to unlock it by holding RATE down for a few seconds). Hope this helps. 73, Rich AC7MA On 06/10/2013 01:08 PM,

Re: [Elecraft] KX3 and 2 Meters

Thanks, Rich. I have followed this suggestion and it has removed that band from the up/down field. I don't have an external transverter of any kind, so this feature is probablynot something I will be able to use. The list has been very informative, as usualy. steve, N4EUK On Tue, Jun 11,

[Elecraft] KX3 and 2 Meters

I am the new owner of a slightly used (only on Sundays that didn't conflict with baseball or football, according to the previous owner) KX3 and just beginning to understand how it works. I am slowly reading each page of the operator's manual and checking each function of each knob and button so I

Re: [Elecraft] KX3 and 2 Meters

On 6/10/2013 4:08 PM, Steve wrote: I am the new owner of a slightly used (only on Sundays that didn't conflict with baseball or football, according to the previous owner) KX3 and just beginning to understand how it works. I am slowly reading each page of the operator's manual and checking each