[Elecraft] [Kx3] Feature request: AUTO INF:RIG CTRL

Hello, When turning on the Auto inf: Rig Ctrl Could a switch be implemented so that the audio output is not muted. I use the Kx3 to controll the Kx2 and would like to hear both Kxs on different antennas. Thanks for considering 73 de Hajo dl1sdz --- Cela est bien dit, ...,mais il faut cultiver

Re: [Elecraft] KX3 Feature Request

I have a brand new, never installed, WindCamp brand heat sink for the KX3. All the mounting holes are drilled & countersunk for a neat & easy installation. It is red anodized after milling and has a bare spot on the inside for more efficient heat transfer from the two RF output devices. This is

Re: [Elecraft] KX3 feature request: mAh counter

, 2016 4:08 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KX3 feature request: mAh counter On Thu,1/21/2016 5:58 AM, Al Duncan wrote: > There are a number of compact devices available that do that and more. I use > the miniature "Watt's Up" watt meter/power analyzer which

Re: [Elecraft] KX3 feature request: mAh counter

On 22/01/16 14:14, elecraft-requ...@mailman.qth.net wrote: There are a number of compact devices available that do that and more. I use >the miniature "Watt's Up" watt meter/power analyzer which displays battery >voltage, current, mAh, watts and Wh. Yes and no. All versions of this product

[Elecraft] KX3 Feature Request

I know this may be a nit but it would be neat if the VFO B knob would increment without rounding off the frequency. For instance, I participate in the foxhunts and find the fox. Then I use the DW SUB function and dial in the fox with the VFO A knob. If I use the VFO B knob it rounds off the

Re: [Elecraft] KX3 Feature Request

Myron, It will already do that. You apparently have the VFO OFS menu parameter set to OFS - change it to OFF and you will have your wish. Note that if you have VFO OFS parameter to OFS, the step size will vary by the value set in VFO CRS. The size setting is per mode. See those menu items

[Elecraft] KX3 feature request: mAh counter

Hi, A feature that would be very handy (if possible) would be a mAh counter that could be reset as needed. With many of the batteries we use in the field (LiFePO4 external or high quality NiMH internal) having relatively flat discharge curves, monitoring voltage doesn't give you a very good

Re: [Elecraft] KX3 feature request: mAh counter

On Behalf Of David Orman Sent: Thursday, January 21, 2016 8:08 AM To: Elecraft Reflector Subject: [Elecraft] KX3 feature request: mAh counter Hi, A feature that would be very handy (if possible) would be a mAh counter that could be reset as needed. With many of the batteries we use in the field (LiFePO

Re: [Elecraft] KX3 feature request: mAh counter

Excellent news Wayne. Thanks for keeping us updated! 73 from David GM4JJJ > On 21 Jan 2016, at 15:33, Wayne Burdick wrote: > > This is already on the KX3 firmware task list. We tested the basic idea, and > it works very well. Just a bunch of details in the UI to consider.

Re: [Elecraft] KX3 feature request: mAh counter

This is already on the KX3 firmware task list. We tested the basic idea, and it works very well. Just a bunch of details in the UI to consider. 73, Wayne N6KR On Jan 21, 2016, at 5:08 AM, David Orman wrote: > Hi, > > A feature that would be very handy (if possible)

Re: [Elecraft] KX3 feature request: mAh counter

On Thu,1/21/2016 5:58 AM, Al Duncan wrote: There are a number of compact devices available that do that and more. I use the miniature "Watt's Up" watt meter/power analyzer which displays battery voltage, current, mAh, watts and Wh. Yes and no. All versions of this product I've seen read

[Elecraft] KX3 feature request - locked menu option for ACC2 IO - for tx inhibit

Hi Wayne co. I have recently been larking about with an MFJ-1707 in the hope of using it to prevent my newish Wellbrook loop from being sent to an early grave by my KX3. I've modified the MFJ-1707 to achieve a closed loop solution triggered by the KX3's keyline output, with the KX3's ACC2

Re: [Elecraft] KX3 feature request: LCD contrast menu setting

Hello Wayne, many thanks for the positive feedback! I think this will help making this neat little rig even better. vy 73! Sven, DJ2AT Am 17.06.2014 16:54, schrieb Wayne Burdick: Good idea, Sven. I've added this to the wish-list. Wayne N6KR On Jun 17, 2014, at 5:50 AM, Sven Ladegast

[Elecraft] KX3 feature request: LCD contrast menu setting

Hello folks! I noticed when using the KX3 portable with the backlight disabled the LC display becomes hard to read at certain lower viewing angles. It would be nice if there would be a LCD contrast setting in the menu that lets the user control the contrast setting at his preferred viewing

[Elecraft] KX3 feature request

It sure would be nice to activate the ANT button so that it would toggle between two different antennas settings, 1 or 2, when the ATU is installed. I have an OCF dipole and a vertical for HF. Each time I switch between the two I have to retune the ATU. I would much prefer to tap/hold the ANT

[Elecraft] KX3 -- Feature request

Would it be possible to change the Monitor potentiometer so that the CW sidetone can be lowered even farther? Even with the value set at 1 operating for an extended period of time is hard on the ears. And trying to operate with no sidetone is a problem at least with my station configuration. A

[Elecraft] KX3 feature request

When I engage the MON function (sidetone level adjustment) by holding down the leftmost encoder, it would be convenient - and slick - to be able to exit that function by tapping a single Morse code element on the key or paddle. I think the K2 behaves this way, and it was a nice treat to discover.

[Elecraft] KX3 feature request. Wider AM bandwidth.

Many hams are also SWLs and enjoy listening to international broadcasts. The KX3 does a great job and has great audio. Being able to remove all low frequency rolloff makes it sound worlds better than other general coverage ham rigs. It adds real presence to the audio. However the maximum 4.2