Re: [Elecraft] KY Command

On January 7, NR4C posted a function key message file for N1MM+ that used KY commands to send FSK RTTY without requiring any FSK keying interface connected to the K3/K3S AUX port. While the basic idea (<04> used to terminate transmissions) is good, unfortunately there is an error in this file.

Re: [Elecraft] KY Command

Also note that a new field-test version of K3/K3S firmware is presently in test (rev. 5.46) that corrects a long-standing problem with the "RX;" command. This command is often used at the end of "KY;" packets, or just for general use in returning the radio to receive mode. "RX;" now correctly

[Elecraft] KY Command

I am trying to use the KY command with Writelog for RTTY contesting. I have no problem setting up a Keyboard shortcut which then sends the data in the KY command, however I cannot find a way to stop the K3 from transmitting after the command sends the data in KY. I see there is an RX;

Re: [Elecraft] KY Command

Thanks so much. It worked like a champ. I guess I should not have "assumed" that the Prog Ref I googled was the most recent. The one on your site shows the KYW quite clearly. My bad. Thank you Rich On 1/6/2016 23:57 PM, Wayne Burdick wrote: Use the "KYW" form of the command. Inserting a

Re: [Elecraft] KY Command

Yes, I had the same issue last weekend. I rec’d help from several listers including Dick who showed me the proper syntax for n1mm. Below is the function key file I used with n1mm. #NEW VERSION, This Function Key File requires N1MM Logger V12.02.00 or newer #EDITS REQUIRED, before using this

Re: [Elecraft] KY Command

Use the "KYW" form of the command. Inserting a 'W' in place of the normal space causes any subsequent command (in this case "RX;") to wait for the text string to be sent. 73, Wayne N6KR On Jan 6, 2016, at 8:55 PM, Rich wrote: > I am trying to use the KY command with

[Elecraft] ky command not working for me

Had some time today so I started exploring some of the rigs features (finally). Thought I'd try a bit of RTTY via the 232 with the K3 Utility- no go. The KY; is doing nothing. Any suggestions (other than using a sound card...). The TT1 TT0 commands work which is neat and programming the macros

Re: [Elecraft] ky command not working for me

Are you using FSK-D data mode? That is the only RTTY data mode that accepts ASCII input via the KY; command. 73, Don W3FPR 4Z5TO wrote: Had some time today so I started exploring some of the rigs features (finally). Thought I'd try a bit of RTTY via the 232 with the K3 Utility- no go. The

Re: [Elecraft] ky command not working for me

YES! We are in business!!! Thank you. - You're gonna have to answer to the Coca-Cola company. http://www.iarc.org/~4z5to -- View this message in context: http://n2.nabble.com/ky-command-not-working-for-me-tp4824171p4824486.html Sent from the [K3] mailing list archive at Nabble.com.

[Elecraft] KY; command response

I have been trying to use the computer control for my K2/100. I am using the RS232 port on the KPA100. I cannot seem to ever get any response except KY0; to the KY; command. If I send a KY; immediately after KY 123456789012345678901234; while the K2 is still sending the first character, it should

Re: [Elecraft] KY; command response

That was very helpful. Thanks and 73 Kevin w9cf On Tue, Jan 23, 2007 at 09:52:57PM -0800, Jack Brindle wrote: Kevin; This tends to be a confusing command to many people. I have found that using the extended response format provides better information than the basic response, allowing