Re: [Elecraft] Low power draw, low power out?

2006-01-04 Thread Nick Waterman
Don Wilhelm wrote: With both low power out and low current drawn, there is clearly not enough energy being developed by one of the transmit stages. OK, this is kinda annoying, and kinda good news. [...] Once you have localized the problem to one stage, we can help you localize the component

RE: [Elecraft] Low power draw, low power out?

2006-01-04 Thread Don Wilhelm
Nick, In your original probelm description, you did not state how much power the K2 display was indicating - and I would tend to believe it indicated that the power was near the requested power value. Of course, the actual power was not that high, but since the base K2 uses an RF probe type

Re: [Elecraft] Low power draw, low power out?

2006-01-04 Thread Nick Waterman
Don Wilhelm wrote: In your original probelm description, you did not state how much power the K2 display was indicating - and I would tend to believe it indicated that the power was near the requested power value. Think it was indicating HIGH actually. If I remember right, set at 5W, it was

RE: [Elecraft] Low power draw, low power out?

2006-01-03 Thread Don Wilhelm
Nick, Read that paragraph with the undertanding that the most important shared circuits are the PLL Reference oscillator, the VCO, and the BFO stages - and they are also measured with the RF Probe even for receiver testing - the VCO and BFO should also be tested for correct frequency using CAL

[Elecraft] Low power draw, low power out?

2005-12-31 Thread Nick Waterman
K2 #5209, Set at 5W, TUNE, I'm drawing only 1.0A, and should expect 1.3 to 1.6. Similarly, set at 10W TUNE, I'm drawing 1.02A, not 1.8 to 2. I'm pretty sure I'm not putting out the power I should be, and DL1+DMM also implies I'm only putting out about 2-4W, not 5-10. This would be at 7100kHz

RE: [Elecraft] Low power draw, low power out?

2005-12-31 Thread Don Wilhelm
Nick, With both low power out and low current drawn, there is clearly not enough energy being developed by one of the transmit stages. If you have not already, build up the RF Probe that came with the K2 kit and do the Transmitter Signal Tracing steps detailed in the Troubleshooting Appendix of

Re: [Elecraft] Low power draw, low power out?

2005-12-31 Thread Jim Campbell
Don and Nick, Doesn't the K2 drop the power to 2 watts during tune? Or am I thinking of a K2 with the ATU? I know that I was bitten by this once - I thought something was wrong with my K2 when I was trying to tune it up with a new antenna and I had a power meter in line. I had set the K2 to