In my shack I use LP-Bridge to provide virtual serial ports,
including one to the K3.
Does the problem occur if LP-Bridge is not running? LP-Bridge
proxies commands and answers polling from its own "virtual K3".
Both are capable of causing abnormal operation, particularly
with N1MM Logger+
Yes Joe, it has happened on my old Toshiba with Windows Vista laptop running
N1MM by itself. I don't run NaP3 currently on the shack PC on which I run
LP-Bridge. There, I usually have Chrome open as well. The anomaly occurred
once during this week's Phone Fray during which I also had an
I have experienced this same problem over numerous N1MM versions (legacy and
Plus). It is very intermittent and I'm unable to identify a specific
command or cause. It's happened to me on both my shack and portable
computers. This symptom does not show up with my daily logger (N3FJP ACLog)
but
On Sep 9, 2015, at 6:07 AM, K8TE wrote:
> I have experienced this same problem over numerous N1MM versions (legacy and
> Plus). It is very intermittent and I'm unable to identify a specific
> command or cause. It's happened to me on both my shack and portable
>
In my case, the Mic gain is normally set to 8-9 (CM500 headset). The anomaly
decreases the Mic Gain to zero. I manually reset it to 8-9 which restores SSB
power output to normal. I haven’t tried any other actions to restore the Mic
gain. All indications I have this is a Mic Gain problem.
Well said!
73, Mike NF4L
> On Sep 9, 2015, at 5:32 PM, Guy Olinger K2AV wrote:
>
> On Wed, Sep 9, 2015 at 11:29 AM, K8TE wrote:
>>
>> In my case, the Mic gain is normally set to 8-9 (CM500 headset). The
>> anomaly decreases the Mic Gain to zero.
On Wed, Sep 9, 2015 at 6:07 AM, K8TE wrote:
> I have experienced this same problem over numerous N1MM versions (legacy and
> Plus). It is very intermittent and I'm unable to identify a specific
> command or cause. It's happened to me on both my shack and portable
>
Bill,
Memory macros-nope.
All the N1MM macros are the "standard" button pushes for the DVK messages.
A raspberry Pi may be in the future for my station control now that an
inexpensive touchscreen is available. But I will stick with N1MM+-K3
interface for now. In my shack I use LP-Bridge
On Wed, Sep 9, 2015 at 11:29 AM, K8TE wrote:
>
> In my case, the Mic gain is normally set to 8-9 (CM500 headset). The anomaly
> decreases the Mic Gain to zero. I manually reset it to 8-9 which restores
> SSB power output to normal. I haven’t tried any other actions to
Jerry,
Does the K3 respond normally when operated from the buttons and knobs?
If so, the problem lies with the software that you are using - in this
case, N1MM - unless there is a bug in the K3 command structure, and
AFAIK there have been no recent changes.
73,
Don W3FPR
On 3/20/2015 9:00
Evening all,
I was setting up N1MM with the K3 for the Virginia QSO party tomorrow when I
noticed the following strange behavior.
Whenever I press any of the FKeys on N1mm (with the exception of F4 and
F12), the mic gain on the K3 gets set to 1. I cannot remember this was
always this way or
11 matches
Mail list logo