Hi,
thank you very much to OMs who responded to my e-mail. You helped me
very much.
Sebastian, W4AS gave the right reference for my HRD -logbook problem.
Config: VFO IND to Yes.
It now works flawless.
Rich VE3KI helped me with the Line-in: With MAIN:MIC SEL set to LINE IN
(this is remembered
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
2nd try, first had a html e-mail
Hello,
my new K3/100F has arrived on Saturday. So I removed my IC-7400 from the
position right to the screen and put it on the left. The IC-7400 is now
my dedicated 6m an 2m SSB/CW radio. On the right sits the K3 now.
Please have a look:
Oli,
Your first problem is probably caused by HRD.
On your second problem, it sounds as if your Line In level is still set
to zero. With MAIN:MIC SEL set to LINE IN (this is remembered separately
for SSB and Data modes), the Mic gain control adjusts the Line In level.
Adjust this control
K3 has arrived on Saturday
2nd try, first had a html e-mail
Hello,
my new K3/100F has arrived on Saturday. So I removed my IC-7400 from the
position right to the screen and put it on the left. The IC-7400 is now
my dedicated 6m an 2m SSB/CW radio. On the right sits the K3 now.
Please have a look
dl1...@t-online.de
To: elecraft@mailman.qth.net
Sent: Mon, February 13, 2012 6:30:34 AM
Subject: [Elecraft] My new K3 has arrived on Saturday
2nd try, first had a html e-mail
Hello,
my new K3/100F has arrived on Saturday. So I removed my IC-7400 from the
position right to the screen
, February 13, 2012 6:37 AM
Subject: Re: [Elecraft] My new K3 has arrived on Saturday
Oli,
Just started using HRD myself and searching for a solution to the same
problem
which I call bouncing band change.
For me, when I change frequencies within the same band HRD works as expected.
It's when
7 matches
Mail list logo
