Thus far I have found a few of the problems. I needed an FT232R
driver. Now the Winkey can drive the K3 just fine. N1MM on the other
hand cannot seem to run the K3 at all. While the USB connection is on
COM 4 the serial port between the keyer and the laptop does not work on
COM 1. I am
Kevin,
If you have moved the USB connection from connector to connector, check
your USB port assignment in Control Panel. Sometimes a different com
port is assigned to USB to serial adapters unless the same USB port is used.
73,
Don W3FPR
On 6/27/2014 7:46 PM, Kevin wrote:
Thus far I have
2 matches
Mail list logo
