Bill,
That's a great suggestion.
73,
Paul
Paul Saffren - N6HZ
Project Manager
Elecraft Inc.
831-763-4211 x122
www.elecraft.com
On 3/5/2013 11:40 PM, Bill Frantz wrote:
I am currently back level on the utility.
Suggestion: When checking for new versions of the P3 files, notify the
user if
It took me three attempts, failing on the SVGA load the first two times,
even after switching both K3 and P3 off and then on.
I don't know whether this is significant but I had the SVGA disabled (I
have no monitor connected at the moment) the first two times but then
decided to turn it back on
We released 1.13.1.23 (PC) and 1.13.2.3 (Mac/Linux) versions of the P3
Utility to fix many of the issues mentioned here. Has anyone had problems
loading new firmware with the new Utility and if so what are they?
73,
Paul
--
View this message in context:
Paul,
I was using the latest Linux version and the load failed on the SVGA
load asking me to power the P3 on an off again. I did that and it failed
again. I then rebooted everything (K3, P3 and PC) and when I brought up
the utility the only thing not updated was the SVGA code. I used the
] Newest P3 FW Upgrade (Workaround)
Paul,
I was using the latest Linux version and the load failed on the SVGA
load asking me to power the P3 on an off again. I did that and it failed
again. I then rebooted everything (K3, P3 and PC) and when I brought up
the utility the only thing not updated
For the record, my SVGA was on all the time.
Cheers - Bill, AE6JV
On 3/5/13 at 12:41 AM, eastbrantw...@gmail.com (Stephen Prior) wrote:
It took me three attempts, failing on the SVGA load the first two times,
even after switching both K3 and P3 off and then on.
I don't know whether this is
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Newest P3 FW Upgrade (Workaround)
We released 1.13.1.23 (PC) and 1.13.2.3 (Mac/Linux) versions of the P3
Utility to fix many of the issues mentioned here. Has anyone had
problems
loading new firmware with the new Utility and if so what
The update went smooth as silk here. No problems whatsoever. Using serial
adapter card. Tried the USB adapter cable too without problems.
Thanks
Charlie, W4FI
__
Elecraft mailing list
Home:
I am currently back level on the utility.
Suggestion: When checking for new versions of the P3 files,
notify the user if there is a newer version of the utility available.
Cheers - Bill, AE6JV
On 3/5/13 at 10:43 AM, pa...@elecraft.com (Paul Saffren N6HZ) wrote:
We released 1.13.1.23 (PC)
I just finished upgrading my P3 to MCU 1.26, SVGA 1.16 and FPGAx
1.04. The MCU loaded OK but then it rejected the SVGA. I
followed the instructions to power cycle the P3 (and K3 since
that was the closest P3 power switch). I tried a full reload
(Send all Firmware to P3) and it hung again. I
Read almost all the posts and one stuck with me - the one who stated
everything worked fine on a Win7 machine using the same cable.
On a lark, I started my Win 7 virtual machine through VMware, downloaded
and installed the P3 Utility, and connected to the P3 - voila, it worked.
This is going
11 matches
Mail list logo
