Same exact issue here. The P3 screen also became slow to refresh, like once
every 5 seconds. Turn K3 and P3 off/on solved the issue. This only happened
after a screen capture.
Charles, K4ZRJ
> On Jul 28, 2016, at 8:02 AM, w4sc wrote:
>
> I had this issue also. The “0”
I had this issue also. The “0” reading appeared after making and saving a
couple of screen captures. Recycling the power on the P3 did not correct.
Closing the “COMM PORT” and reopening did correct it. I have had other issues
with this connection to the P3 through the K3S USB connection.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Bret,
Do you have the RJ-45 plugged completely into the K3S?
Push on the cable (not the hood) until you hear a click - or pull back
the hood and push directly on the plug, again until it clicks.
73,
Don W3FPR
On 7/28/2016 5:38 AM, MaverickNH wrote:
Hi All,
Just setting up my new K3S/P3
Hi All,
Just setting up my new K3S/P3 w/SVGA/TXMON. At the center/top of the P3
spectrum display, the manuals show a frequency, but mine just stays 0
(zero). Must be I'm missing how to change that? Otherwise, I see spectra and
waterfalls.
Thanks, 73s,
Bret/KC1CJN
--
View this message in
5 matches
Mail list logo