Hello again ELMERS,
(I appreciate all the help from the mail list, but I decided to standardize on
Fldigi and my Macbook Pro … because this is what I am most comfortable with … I
know there are other MAC HAM GURUS out there …)
I am trying to use Fldigi, a Macbook Pro, a Griffin iMic and my KX3
The waterfall display normally stops during transmission. That is not a
problem.
73,
Don W3FPR
On 7/18/2013 8:30 PM, Esquer Dave wrote:
Hello again ELMERS,
(I appreciate all the help from the mail list, but I decided to standardize on
Fldigi and my Macbook Pro … because this is what I am
Dave,
Do you have the transmit audio levels set correctly? The ALC meter
should illuminate 4 bars during transmission with the 5th bar
flickering. If that is not the case, increase the audio drive level
(either soundcard settings or KX3 mic gain or both) until that condition
is met.
73,
If you want to see your transmitted signal on the waterfall, go into FLdigi
config settings Waterfall-Display-Transmit signal and check the Monitor
transmitted signal box.
The level settings you have are similar to what I use, but check the TX level
as Don describes in another response to your
4 matches
Mail list logo
