John,
I think you mean 50Hz, not 50kHz.
That offset is only used when using CW in SSB mode - and it should be
set to the tone you want the receiving end to hear when you switch to CW.
For normal operation (not CW in SSB), the CW offset is always equal to
your sidetone pitch. The transmit
Fred KE7X
>>
>> From: Elecraft <elecraft-boun...@mailman.qth.net
>> <mailto:elecraft-boun...@mailman.qth.net>> on behalf of stengrevics
>> <jstengrev...@comcast.net <mailto:jstengrev...@comcast.net>>
>> Sent: Friday, April 21, 2017 8:52 AM
>&g
> <jstengrev...@comcast.net <mailto:jstengrev...@comcast.net>>
> Sent: Friday, April 21, 2017 8:52 AM
> To: elecraft@mailman.qth.net <mailto:elecraft@mailman.qth.net>
> Subject: [Elecraft] Problem Setting CW Offset to Zero
>
> Reading KE7X's manual, I should be
to CW.
73,
Fred KE7X
From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of stengrevics
<jstengrev...@comcast.net>
Sent: Friday, April 21, 2017 8:52 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Problem Setting CW Offset to Zero
Re
Reading KE7X's manual, I should be able to set the offset to zero by
selecting CW WGHT from the CONFIG menu and then tapping the 5 button to
select VFO nor. But, this procedure leaves the offset at around 50 KHz. Am
I interpreting Fred's instructions incorrectly?
Thanks,
John
WA1EAZ
--
View
5 matches
Mail list logo