There is a small jumper wire on the upper right hand corner of the control
board. Is this wire shown on the schematic. If so where and if not where
should it be shown. I developed an intermittent in my K2 after about 3
years and finally discovered that I had failed to solder one of this
Fred,
That jumper is *not* the cause of your intermittent behavior.
There should be a U shaped jumper at least 3/16 inch above the board
at both top corners of the Control Board as well as at two places on
both the top and bottom of the RF Board. The purpose of those jumpers
is to provide an
2 matches
Mail list logo